3PH 3-POLE 120/240V NEMA 1 STR
5.5-22A 1PH 3-POLE 220/240V
The 14CUD32BA is a Solid State Overload, Auto/Manual Reset, Open Type, NEMA 1 General Purpose Enclosure, 3 Phase, 3 Pole, 0 NEMA Size Motor Starter. The starter comes with A1 Frame Size & 110-120/220-240 at 60 Hz Coil Voltage.
The Siemens 14CUD32BA motor starter is a general purpose, solid state overload with auto/manual reset, open type design, NEMA 1 enclosure, and 3-phase. It has a NEMA size of 1, an A1 frame size, and a 3 pole and 3 phase configuration. It has an amperage range of 5.5 to 22 amps and is suitable for a coil voltage of 110 to 120 or 220 to 240 volts at 60 Hz. The motor starter features a manual reset with the time delay option and a status LED.
Heavy Duty 1 HP 120/208/240 Vac, 5.5-22A Motor Starters that include features such as a spring return armature to prevent hard starts, undervoltage / overvoltage trip units, and an internal diode to protect against reversed power supply conditions. They are for use with open type applications where the electrical enclosure is connected to the enclosure of the load by a flexible cable assembly and not separated from the enclosure of the load. The noninterlocking covers must be provided by the installer. These models are good for high overloads and short term overloads up to 10% for a period
Industrial-strength motor starters can help keep your power flowing at all times with guaranteed reliability. These high-voltage solid state, overload protected, heavy duty motor starters provide A1 frame sizes for NEM1 applications and are designed for use in dry locations. The industrial-duty motor starter meets or exceeds NEMA MG1 specifications and is CSA certified.
The Siemens® 14CUDA32BA heavy duty motor starter, solid state overload, auto/manual reset, open type, NEMA 1 general purpose enclosure, 3 phase, 3 pole applications, 0 NEMA size, 5.5-22A amp range is an open type design. The overload device is rated 50kAIC for short term duty and 50kAIC for long term duty cycle. It uses a 24VDC coil voltage and has a short circuit rating of 1.5kA at 208VAC and 1060 VAC/ 60Hz . Maximum voltage is 600VAC/ 60
A Solid State Overload Relay with Auto/Manual Reset. This SIEMENS brand motor starter is designed for use in environments where climatic extremes and dust tend to be present, such as mining, power generation, wind energy and water/heat pumps. The solid state components provide higher protection against contact voltage and the open type allows for continuous service without re-starting of overloads.
Free Shipping
In stock
