SIEMENS 14EUE32AA Industrial Controls 120/240V 10/40A 3P Op Starter

120/240V 10/40A 3P Op Starter

SIEMENS 14EUE32AA Industrial Controls 120/240V 10/40A 3P Op Starter, SIEMENS.

This IM333Z312022P36JB15 is a 120/240V 10/40A 3-Phase Open Starters. It can work with 480VAC and has thermal overload protection. It is used on hydroelectric power plants, mine hoists, coal handling plant and other applications that require high start torque.

The 14EUE32AA is a 120/240 volt starter for electric motors with a built-in overload relay. The starter has a winding time of 1 s and comes in single rated or double rated versions, depending on motor rating. This starter combines both 4-pole and 3-pole motor capability in one device offering either 10 A or 40 A at 2 V AC/DC rated voltage with a maximum load of 250 W. It offers starter ratios from 1:1 to 1:103 and the applicable wiring configuration is sealed on the housing bottom making wire termination easy. There are other features of the 14EUE32

The Siemens 14EUE32AA is a 120/240V starter designed to control motor overloads with high and low limits. It features a simple plug-in installation for quick installation. This starter is intended for use on electric motors with an approximate power consumption of 30 to 33 HP at 1800 rpm and less than 5850 starting amps. Its copper winding is highly resistant to dilution of its insulation, it has short-circuit contactors, and it has an easy-to-use trip unit.

The 3P Starter is intended for general industrial or commercial applications requiring a power starting capacitor with a starter, overcurrent protection, and ground fault monitoring.

This Starter is 14EUE32AA, very suitable for Siemens brand.

Uncompromised quality and design. For starters, this starter from Siemens provides superior protection against electrical hazards while its heavy duty construction ensures that it will withstand the most demanding commercial applications.