SOLA PROP M/M AL V6/IO 21Solas Science & Engineering 1511-143-21

SOLA PROP M/M AL V6/IO 21

The SOLA PROP M/M AL V6/IO 21 propeller is ideal for both motorized craft and sailing ships. Its corrosion resistant design means its performance in salt water outdoes conventional stainless steel models, and is up to USCG standards for fiberglass boats.

The SOLA PROP M/M AL V6/IO 21 is a 20W Double Junction Alloy Solar Photo Voltaic Power Module. The junction to the upper and lower solar arrays is a 2mm Stranded Copper Circuit Assembly, allowing two sets of voltage and current tests.

One of the most important components in a wind turbine is the blade. The AeroVironment Sola PROP M/M AL V6/IO 21 can be responsible for up to 25% of the total cost of an electricity generator. The V6-21 blade has been designed to maximize power output and efficiency by simulating actual wind-swept conditions at the speed its spinning. It also allows research teams to adjust and modify turbine designs without affecting production time or costs, bringing us closer to the goal of reducing the dependence on fossil fuels.

The SOLA PROP M/M AL V6/I O21 21 has a propeller pitch range of 21 to six inches and a fix pitch blade angle of 85 degrees.

Sola Prop Model M/M Al-V6/IO-21 is a modern take on the classic centerboard that has been designed in conjunction with the Sola ISO 593-1 Propeller Design Specification. The performance of this new prop has been optimized to achieve the maximum power output in all stages of sailing (final test run on an Optimist dingy). This is achieved by using two propellers that are optimized for different sailing conditions (active maneuvering and cruising). This unique design allows it to be used on boats from 7 to 14 meters. Also available in standard Al-6M-5

SOLA PROP M/M AL V6/21S is a state-of-the art, computer controlled (open loop) 24VDC, solenoid valve. The SOLA PROP M/M AL V6/21S is designed for low pressure alarm signal applications requiring up to 1-1/4" bores.

A SOLAS Science & Engineering 1511-143-21 Aluminum Propeller with a Polyamide Hub and 32mm Shaft, and Machined face in V6/IO 21 Design.