SOLA PROP M/M SS 9.9-25HP 13Solas Science & Engineering 1231-101-13

SOLA PROP M/M SS 9.9-25HP 13

The SOLA PROP M/M SS 9.9-25HP 13 is a Stainless Steel Propeller that is designed for a minimum boat length of 10 feet and a maximum boat length of 25 feet. The propeller is a Cast Aluminum with Solas Science & Engineering and its diameter will pass through the center board of the boat. It will raise or lower the performance range depending on weather.

SOLA-PROP models have a solid shaft and a solid needle bearing for durability. This propulsion propeller is made of Stainless Steel, and is powder coated for corrosion resistance. *** SOLA PROP M/M SS 9.9-25HP 13Solas Science & Engineering 1231-101-13

Whether you're just cruising around the lake or plan to take it offshore, our SOLA PROP SS 9.9-25HP 13 2000 series propellers will have you powered and ready. The quality CF8 carbon steel construction is durable and lightweight, and the fully machined blades ensure a smooth and strong propulsion system. Designed for saltwater use, these propellers are made to last with a easily replaceable stainless steel shaft adapter that can be removed if needed. SOX204

Enjoy power and smooth performance when you replace the propeller on your older Johnson, Evinrude, or OMC boat motor. This SOLA PROP M/M SS fits motors with a maximum shaft diameter of 1-1/8".

The SOLA Sun-Mate 9.9-25HP side shaft propeller is equipped with a stainless steel hub that has two different thread pitch to achieve the optimal match on your engine. The unique blade design provides optimized system performance by directing water to be expelled from the propeller after it rotates. These propellers fit an adapter mounted to a 5" diameter shaft and are suitable for use with a SOLA prop-lock lock ring.

This SOLA Propeller is designed specifically for the Mercury 9.9-25 HP and 13 horsepower engines. It comes with a full warranty and is ideal for the boating enthusiast who wants to use their boat on journeys that require more range between stops or across larger lakes or seas.

This SOLA prop meets all ABYC/USCG/EU standards. It is a three blade polished stainless steel propeller and is designed for use in outboard engines from 9.9 to 25HP. It is a direct swap for Mercruiser/Yamaha and OMC/Johnson & Evinrude props. The props have the same blade angle as the factory standard props and are adjustable from 1 to 3 blades with an adjustment tool. It has a pitch of 4" to