MARKET FORGE F13041 Fill Solenoid Generator 5162-1

SOLENOID VALAVE 120V

The F13041 is a 120V 5162-1 solenoid valve that has 1/3HP, 115V, 60 Hz, and 5850 Watts. It also comes with a PVC conduit box.

The MARKET Forge F13041 Fill Solenoid is a solenoid valve used for automatic fill systems. It has a voltage of 120V, amperage of 2.2A, and a diaphragm type of BSPT10/22NPT1/2?

The F13041 is a Fill Solenoid Valve that replaces the solenoid valve on the market. It is a 120 volt 3/4 NPT fill solenoid.

The F13041 Fill Solenoid Valve (120V) is used to maintain the present level of a tank. The fill valve is gravity sensitive. When attached to a source of liquid at least 30 degrees lower than the container, flow will be reversed creating a siphon effect.

This MARKET FORGE F13041 Fill Solenoid Rotary Valve for 2-Post Lifts is a replacement part. It can be used to replace an existing part, or can be used as a spare should you need it in the future. This item is 120 V and replaces the 7716-1 type fill valve.

The Mark Forge 5162-1 Fill Solenoid Valve is a generator fill solenoid valve that operates through a gear reducer on the 120 Volt A.C. Generator Drive. The Mark Forge solenoid valve controls water flow to the evaporators in the Water Cooled units in case of a power outage. The 5162-1 solenoid valve is for unit sizes 1800 and larger and has a 10 amp output with 2 conductor connections

The Fill Solenoid valve for gasoline/petrol dispensing is used on LP gas/propane and on diesel fuel as part of the receptacle assembly to perform accurate and uninterrupted filling of storage tanks. The Fill Solenoid valve is fully adjustable. It can be used with Propane, Butane, Diesel Fuel, Gasoline and Oil mist. The upper threaded port attaches to a fill hose (not included) that pumps fuel into the storage tank. The lower threaded port attaches to a "T" type nozzle assembly, which then wraps around the tank opening. These fill nozzles have an internal float mechanism