SPEARS 410-020 2 MPTXSOC 90 S40 PVC (10/BX)

2 MPTXSOC 90 S40 PVC

Spears's 2 MPTXSOC 90 S40 PVC Channel features ribbed spring wire to prevent buckling and compression creases. The metal sliding/locking channel is designed to fit through pier tops with minimum clearance of 1.97" and will slide back and forth without getting stuck. This channel has a working load limit of 750 lbs.

Spears MPTXSOC 90 S40 PVC is a versatile, general-purpose tape ideally suited for interior application.

Spears SONIC-FLEX 90MP S40 PVC is a 16 gauge, 4" x .035", non-metallic sheathed UTP cable with a white PVC jacket. This grade provides high strength, flexibility and electrical resistance. It is ideal for above ground applications, direct burial or conduit installations and may be used in contact with potable water.

This 2-port modular patch panel is designed for mechanical termination of PIM 4 and PIM 6 circuits. The panel is configured with a mix of S40 PVC (silver) and ST termination positions (2S ST, 2S 90/270, 2S DPX, 2P 90/270). This configuration supports voice applications, and data applications such as 3701/3705/3725 series with T1 circuit modules. Each port of the panel supports two T1 circuit cards or four E&M circuit cards.

Spears non-metallic four-conductor 90 degree elbows maximize floor space while providing vertical and horizontal cable transitions to allow cable placement or routing in the most convenient direction. Each elbow is factory terminated on both ends with a steel or PVC conduit barrel. They accept cable sizes up to .40 inches (10 mm) including NM, SDR, acc. to UL Style 2, 3, 4; CSA Style B-VII; ANSI/ICEA S-21 Univ.,Gr. I, II; ACSR Gr. 23, 24; MCM per "B" Conduit.

ARX Fittings are thermoplastic-elastomer quick connect/disconnect fittings for use with crosslinked polyethylene (XLPE) cables. The fittings