Spirax-Sarco 54531C "TD52 3/4"" Thermodynamic Trap" "TD52 3/4"" Thermodynamic Trap"

"TD52 3/4"" Thermodynamic Trap"

Spirax-Sarco 54531C "TD52 3/4"" Thermodynamic Trap"

The TD52 3/4"" Thermodynamic Trap is designed for high recovery low GPM applications. It provides up to 15,000 BTUs per hour of net heat value at a nominal pressures of 3.5" WC and 4.0" WC. The trap is constructed of stainless steel and can be installed in vertical, horizontal, tank-down or tank-up applications. Installation versatility is enhanced by the TD52's sloped cover that helps to prevent blockages from debris.

For a limited time, you can enjoy the savings of the Spirax-Sarco 54531C "TD52 3/4" Thermodynamic Trap"! You'll reduce water consumption while preventing unwanted sewer gases from being released and escaping into the atmosphere. This good-looking trap is designed to fit all standard plumbing configurations. With so many additional features, the Spirax-Sarco 54531C "TD52 3/4" Thermodynamic Trap" is easy to install.

This TD52 3/4" Thermodynamic Trap is a replacement part for the following product(s): \"55521C-TDS 6.250" Liquid Level\" or \"55555C-TC A/B 0.500 to 1.000 Gallons per Minute\"

The TD52 3/4" Thermodynamic Trap is for water heaters with more than one water outlet. The trap adapter will be required if you have a secondary outlet at the bottom right of your heater.

The TD52 Thermodynamic Trap is a coiled double jacketed condensing steam trap, with an integral pressure regulator that limits the steam discharge. The main use for the TD52 series is as a condenser trap to protect the condenser's feedwater pump from loss of prime due to excessive steam pressure.

Thermodynamic Traps are specifically designed for condensation control of medium to coarse capacity condensate lines. The trap body is made from high-grade stainless steel which provides a long life and reliability in condensate applications.