HONEYWELL ST7800A102 ST7800A102 10 SECOND PURGE TIMER *** RESTRICTE

10 SECOND PURGE TIMER *** RESTRICTE

ST7800A102 - 10 SECOND PURGE TIMER

THE 10-SECOND PURGE TIMER IS AVAILABLE IN ONE-, TWO-, AND THREE-HOLE MODELS.

The 10 Second Purge Timer accessory is used to ensure the proper removal of air from a fuel system after it has been tested. The timer displays the time as the purge valve on the tank truck nozzle is opened. There is no adjustment required to use this timer on many models of air cylinder tester, as it will automatically start counting once power is applied. The 10 Second Purge Timer can also be used with a mechanical type pressure regulator in conjunction with a flow indicator to provide a means of determining whether an entire system has been purged or how much "make-up" air remains in a system.

The 10 Second Purge Timer replaces your current purge timer and can be used with a Honeywell gas (LP or Natural Gas) or electric dial-type range vent to help control how long the range is set as closed. It also controls the minimum amount of time that the range vents will remain closed if the Appliance Control is turned off. This eliminates burning off excess gases after cooking to reduce carbon monoxide hazards and nuisance odors.

Achieve optimum performance with this 10-second purge mixer. This 10-second purge timer is recommended for three phase applications, with the ability to control six analog valves through a 3/4" Fischer compatibility connector. Ports are fully interchangeable and compatible with any other Fischer brand analog manifold. Housing is made of fiberglass reinforced polyester resin.

Purge your gas or liquid fuel-fired cooking appliances quickly when you use the Honeywell 10 Second Purge Timer. It can be set to just 10 seconds for fast and easy purging of all units, or it can be set for a longer purge time if needed for more sensitive equipment. The rounded steel housing is both durable and rust resistant, making it ideal for outdoor or kitchen use near sinks and water when used with liquid fuel-fired equipment. It also features an easy-to-read dial face that allows you to set your unit quickly and easily.

10 Second Purge Timer - To get the best purges, you need more than just a standard timer. The 10 second purge timer allows you to consistently purge for the entire time recommended by the manufacturer of your gas or liquid chromatograph (depending on whether you use injection or packed columns). The 10 second purge timer will help you achieve a fast, consistent purge--and your results will show it.