Sta-Rite Pumps U217-1216 "PRESSURE SWITCH

"PRESSURE SWITCH

The PRIMOS Pressure Switch is assembled with the finest components and thoroughly tested prior to shipment.

Pressure switch for fountain pools.

The ST-U217 pressure switch is used as a control to activate piping valves when the water supply system pressure reaches 95 +/- specified psi.

The Pressure Switch on this pump will prevent the pump from running for more than 2 hours unless 12 volts dc is applied to the pump. This is convenient when you want to ensure that supplemental lighting or electric heaters do not keep the pool water warm on cloudy days or at night.

Protect your pump from damage caused by running dry. This pressure switch senses the water level in the tank and automatically turns on the pump when needed. It will also turn off the pump if product is lowered below the pressure switch setting.

The Spa Sentry PM2000 Pressure Switch controls the pump whether the water is cold or hot. The switch should be installed downstream of the pump. If your spa has both a wall and a floor sensor, you will need one (1) Pressure Switch to work with each. If your spa has either a wall or a floor sensor, you will need one (1) Pressure Switch for each type of sensor used in the spa.

A tested & proven positive system pressure switch, designed for above ground or in-ground pool circulation equipment. This pressure switch will improve the efficiency of your existing equipment by operating at a higher flow rate resulting in increased water flow and reduced energy usage.