STANLEY-PROTO IND TOOLS PO4914CF WR CROWFOOT 3/8 DR 7/16 OE

WR CROWFOOT 3/8 DR 7/16 OE

Model KP-15 Series Pressure Controllers are miniature pressure regulators designed for use on liquid heating and cooling systems

The controller has two set points for the minimum and maximum pressures

The Danfoss KP-15 is easy and intuitive to use, giving you 24/7 access over all settings from an Internet-enabled device or smartphone app

Danfoss 060-203191 KP-15 PRESSURE CONTROLLER The KP 15 pressure controller is a solid-state electronic device

If the measured pressure falls outside of these limits, the controller turns on and off the electrical compressor until pressure is within limits

Danfoss pressure controller KP-15 is a general purpose, pneumatic control valve

The Danfoss 060-203191 KP-15 PRESSURE CONTROLLER is an ideal replacement for many old and obsolete brands such as: 775X2, AO Smith, Armstrong, Atwood, DuraFlo, Halsey Taylor, Homesteader and more

These are direct-acting, diaphragm-actuated control valves that regulate the pressure in a system to a preset value

The air pressure required for actuation ranges from 2 to 10 PSI

It has two high stability outputs, which are controlled by the same microprocessor that controls the temperature compensation and overpressure protection

APPLICATION: Controls pressure in a refrigeration system based on a control signal from a temperature sensor

It is designed for both heating and cooling systems

With the ability to fit in a single gang box, this controller is simple to install

They are available in four pressure ranges to suit most applications

It receives control signals from a variety of different controllers and systems

The adjustable maximum flow rate at 2 PSI is 15 gpm and at 6 PSI is 22 gpm

It can be used in heating, air conditioning and refrigeration systems, as well as control loops with compressed air or water

The KP-15 solenoid valve is a pressure controlled, air operated diaphragm valve with normally open operation and manual spring return

This model features an aluminum heat sink that allows operation at elevated temperatures without compromising performance

The Danfoss KP-15 Pressure Controller is a pressure controller for mounting on a DIN rail

The flow is maintained at a constant rate by using the adjustable orifice and differential block between the supply and discharge ports

Danfoss 060-203191 KP-15 PRESSURE CONTROLLER

Danfoss LaCrosse 060-203191 KP-15 PRESSURE CONTROLLER

Upgrade your home HVAC system to the Danfoss KP-15 Pressure Controller, a quality, multifunctional temperature controller that boosts comfort and efficiency

The Danfoss 060-203191 KP-15 PRESSURE CONTROLLER is designed to control pressure within a system that uses gas or liquid