Maxitrol 66047 T244 Selectrastat Wall Mount, 55-90 Degree F Temperature Range

SELECTRA STAT 40-80F

MaxiTrol's SelectraStat is accurate to ±1% of reading between 40° and 80° F. It features a repeat accuracy of 0.5% of full scale, is adjustable from 1.0 to 99.9%, and can display from 0 to 9999 amps. The selectraStat is a compact unit designed for mounting on any wall, surface or board using the convenient mounting holes provided, with the temperature sensor mounted in a fully articulating and removable probe head assembly which

The SelectraStat Wall Control unit lets you select the precise temperature you require and then automatically maintains your selected comfort level within 1.8 degrees, to provide more consistent, predictable heating or cooling. The SelectraStat operates on 120-volt A/C power.

For more than 60 years the SelectraStat has established an enviable reputation for quality and reliability. The true RMS intelligent control is standard on all models. You accomplish what many said was impossible - a truly rugged and dependable heat/cool system all contained on a single chassis

External Controls Maxitrol mounting brackets are designed for the Selectra models. They are adjustable for 40 to 80F outside temperature range. Used with the remote sensor probe, these units can be mounted on a wall in a room where the temperature is most needed.

Maxitrol SelectraStat Programmable Thermostat

Maxitrol's SelectraStat series of precision electronic temperature controls are designed for all residential heating applications which use direct or baseboard heaters. The unit is designed to control the temperature within a room or area, and equipped to control up to two heating sources.

The Maxitrol T244 features an easy-to-use control with a single, large button for instant temperature selection. The LED dot-matrix display indicates the set point and has 22 mm (0.87") high, red digits - making it simple to read from a distance. The SelectraStat temperature controller can be controlled via both dry contact or Modbus RTU settings.