SCHNEIDER ELECTRIC 30966 TC4111 TC-4100, TC-4200 Series Two-Position, Single & Dua

TWO-POSITION SINGLE STAGE, SINGLE B

THERMALCAL™ Series Two-Position, Single Stage and Dual Stage Temperature Controllers from Schneider Electric provides optimal solutions for the Automat

The TC4111 and TC4200 Series Remote Electronic Selector Switches are 2-position single stage, single throw, rocker type switches. They offer an output contact rating of 20 amps at 250 VAC, 10 amps at 30 VDC, 200 mA at 24 VAC/VDC and 1 amp at 24 VDC for a SPDT (Single Pole Double Throw) switch.

Single, two-position switch (single/double stage). Push button momentary release and rocker constant contact operating mechanism. Lever or horizontal actuator available.

Uncompromising Serviceability - All Schneider Electric two-position single and double pole circuit breakers are designed to provide precise switching control for any low, medium or high voltage application. Their two-position design allows the breaker to be used in everyday applications as a single pole breaker or easily converted into a two stage circuit breaker without the need of any tools.

The TC4111 is a two position, single stage, single pole Contactor that provides 4.0 Amps and 220 VAC for its rated current with a maximum of 15 Amp resistive. This contactor can be used in variety of applications from lighting systems to heaters and motors.

For use in power distribution equipment where high performance or high protection is required. The TC4111 two-position recloser provides superior clearing ability, indicates fault current on both line and load circuits and may be used in two-wire systems. This recloser is designed for use with the SCHNEIDER ELECTRIC QTC-XH single phase recloser.

The Schneider Electric 2000 Amp 1 Phase Inverter/Battery Charger TC4111 is a reliable option for powering RV's, boats, recreational vehicles, backup power for cell towers and back up power systems. This device can be operated as a battery charger to restore the energy needed for your batteries. With 2000 Amp continuous output and four-channel adjustable battery charging current, you can even use it as a power source. The Remote Display Module (RD-4100) enables remote monitoring of battery voltage and charging current for convenient centralized control over the inverter/charger and the connected batteries.