Johnson Controls 316927 , Inc. TE6315M1 JSON NICKEL DUCT AVERAGE SENS

1K Ohm Averaging Sensor

The TE6315M1 is a 0 to 5VDC, 1k Ohm averaging direct thermal sensor, with extremely fast response time. The TE6315M1 features an integrated 6-inch wire harness that offers easy installation. The low profile form factor maximizes available space in confined area applications.

This pneumatic sensor is a 1k ohm, differential, differential input channel with low level output, high sensitivity and a high Resolution. The TE6315M1 JSON Nickel Duct Sensor has a high resolution, low co-effi

With a resistance range from 1 Ohm to 100 KOhm, the TE6315R1000 average sensing voltage output is ideal for measuring loads in commercial and industrial applications. The TE6315R1000 average sensing sensor offers a small pcb footprint and a low 0.5 W maximum power consumption at 5VDC, further making it an ideal sensing solution for building automation systems.

Our TE6315M1 NICKEL DUCT AVERAGE SENS is built with leading-edge technology to provide you with the data you need. This product communicates on two distinct serial buses for easy installation. This device is designed to handle voltages between four and five volts . Plugs directly into the TE5102 network module, reducing wiring costs.

The TE6315M1 JSON Nickel Duct Average sensor is used in residential and commercial applications where temperature and relative humidity data are required. It is designed for installations that require averaging measurements over a number of ducts to control heating and cooling loads and save energy.

Designed for natural gas or propane, the TE6315M1 averages readings over 20 seconds to help detect wide-spread problems . The easy-to-read display on the front of the sensor shows pressure in pounds per square inch (psi) and/or inches of water column (wc). The adaptive averaging function on the TE6520M1 helps detect intermittent leaks that are beyond the range of conventional averaging sensors. Designed for 3/4" natural gas line.

The TE6315M1 JSON uses 4 voltages acquired from the four platinum cadmium telluride (PCT) thermocouples to create a single, averaged voltage value for use in 4-20mA variable resistance analog outputs. This sensor is for DC heating or fluid temperature measurement at temperatures up to 600 °C. An internal temperature-to-voltage converter averages the temperature data from each channel to provide an averaged temperature reading; automatic calibration ensures that readings are easy to monitor.

The TE6315 is an averaging NICKEL DUCT low voltage control, compatible with all existing JSON mobile controllers, including the SCX204 series, XD66T series and XD62U series. The TE 63 Series is an accurate measuring sensor for mobile air conditioning, mobile heat pump or mobile refrigeration systems.

Sensor input and output connections. 90-day warranty and 12 months of FREE support via phone, email and web interface. Easily program your sensor with our free Excel spreadsheet available at www.te.com.

This sensor is for use in air ducts where accessibility to hot temperatures and high moisture are present. The TE6315M1 features an integral analog-to-digital converter, 4-20 mA/4-20 mA output signal drive, high speed signal processing circuitry, programmable gain amplifier, digital counters and pulse width modulator built inside the sensor housing. The sensor provides local digital readings on port B of the controller or can be averaged by the IAQ distributor module to provide an average reading.

The TE6315M1 JSON Nickel Duct Average Sensor provides accurate temperature measurement in ducts. The TE6315M1 combines the TE6309M1 Spot Nominal, NTC thermistor sensor with a space heater to ensure stable temperature measurements in ductwork.

Nickel metal-hydride battery has a capacity of 1.5 amp-hour. It delivers high capacity and long life characteristics requiring only one cell, enabling high capacity utilization for high power-consumption equipment.