TEKMAR 152 Controls 2 STAGE SETPOINT CTRL

2 STAGE SETPOINT CTRL

TEKMAR 152 NEMA 4X (IP55) ELEC CONT ACCESS CTRL, HIGH-PERFORMANCE, DUAL POINT TRIM. ADVANCED OUR 152 SERIES ACCESS CONTROLLER FEATURES AN AMERICAN STANDARD 2 STAGE SETPOINT CONTROL THAT OFFERS OPERATOR MORE CONTROL WHEN TEMP IS ALWAYS ON THE EDGE OR NEVER EXACTLY IN THE ZONE.

The 2 stage setpoint control enables the user to have differential temperature controls for an application where accuracy to within 1°F is necessary. The control features a 0-5 VDC or 0-10VDC analog output that can be used with various types of transmitter via an optional slave transmitter (Product No. 143).

The two stage setpoint controller, with an input voltage range of 24 to 120 volts ac, is designed for use on two stage air conditioning and heating systems including cooling units. The setpoint controller is microprocessor based and has individually adjustable temperature setpoints for each operating stage. The digital controller circuitry insures accurate control of the constant setpoint plus a proportional time delay start up feature for VAV terminal units. Each setpoint incorporates a -15F to 65F temperature range switchable in 1 degree increments by the operator from the front panel.

A 2 stage setpoint controller allows for the connection of 2 systems and the ability to vary the settings of each system independently by using a different time and temperature for each.

Use the 2-stage control to maintain heating or cooling setpoints and increase controller accuracy.

A rugged 24 VDC control for heating, dehumidification, ventilation, and environmental control systems. The control is designed to be used with Tekmar's Advanced Energy Management System (AEMS) and allows incoming air temperatures to be set at any temperature between 40°F (4°C) and 90°F (32°C). Stage 1 can be programmed to achieve process set points automatically as well as cycle heating and cooling equipment. A power failure/emergency stop input and a normal/emergency alarm output are also specified.

Two stage control with one outlet for your humidifier and one for your dehumidifier or air cleaner by Tekmar. The controller has a display in front to set the humidity from 35% to 60%.