Belimo 292447 Aircontrols (USA), Inc. Damper Actuator, Air, Spring, 22in-lb, On/Off, 120

120V SPRING RETURN ON/OFF ACTUATOR

This single pole On/Off actuator allows remote switching of an air-conditioning or air-handling system. The spring return on/off function is controlled by a 11/32-inch throw. It has an input voltage of 120V and maximum wattage of 2.5kW. This actuator is great for new or replacement installations and will provide years of reliable service.

The Aircontrols, Inc. On/Off Factory Damper Actuator, Spring Return, toggles from ON to OFF and back with a 120V electric signal. If you are looking for the just-right amount of air circulation to pass through your space via your company's HVAC system, then it is a good idea to conserve energy during the colder months with your AC damper actuator. The device also has an easy spring return for effortlessly switching between open and closed position.

The 292447 is a spring return On/Off actuator with an operating force range of 22 to 24 in-lb. It has a bushing length of 0.875 in (22mm), and a ramp rate of 25%.

The Belimo 292447 Aircontrols (USA), Inc. standard actuator is an On/Off actuation spring return type in a lightweight, compact design for use on air conditioners, packaged heating and cooling systems, heat pumps and similar equipment. It is designed for residential and commercial applications requiring direct replacement of 1/8-1/4 hp with 30ma to 50ma motor loads, continuous duty, full cycle operation, at 208-277V

The Belimo S15T-22-F5S On/off Sprung Actuator is a safety solenoid valve designed to control the flow of air or gases. The 22in/lb spring return force device has an infinite position adjustment. This design allows for maximum flexibility in valve application. The S15T-22-F5S is an excellent choice when used with multiple loads and multi channel valves.

These return-spring return, on/off, air dampers come with a 3/4" bore and a 1" from the outside end of the shaft to the nut. The shaft is 6-1/2" long with 8mm thread. All up and down movement is limited to 2-3/16" (53mm). Maximum ambient temperature: 120 F (49 C)

Our Aircontrols are designed to control air temperature and provide comfort by distributing conditioned air. The actuator, which is a basic component of an air control system, controls rate of airflow through the system by translating mechanical energy (spring retur n) into thermal energy in the form of increased air temperature. Used on standard and low-temperature reversing systems to control air flow direction.