Trane BLW0144 115V Combustion Blower Assy

115V Combustion Blower Assy

Its long jaws provide extra gripping power on larger diameters and lengths

The greater the force you exert, the more powerful it is

MSRP $3,995

It fits over the bolt or axle and grips onto the drum or hub when it is turned

A hand crank is used for applying pressure to the puller

from vehicles

It features a 6 3/4in by 2 3/4in by 1 1/4in long jaw

The OTC-1038 is designed for pulling, lifting and removal of heavily rusted, bolted or riveted castings, gears, bearings and other hard to reach components

The Grip-O-Matic 7 Ton Mechanical Puller was developed for everyday use at a reasonable price

The handle has an adjustable clutch designed to prevent slippage when pulling especially hard or at awkward angles

It is a mechanical puller, which means it's driven by the force you put against it

The mechanism of this device is simple and effective, consisting of a roller handle on one side and a jaw on the other

The OTC Grip-O-Matic Puller is designed to pull on a wide variety of truck and trailer components, including:

Its 2/3 jaw opening measures 11"

The Grip-O-Matic 2/3 Jaw Puller is designed to provide an adjustable grip range from 2 to 3 inches

The long 2/3 Jaw provides more pulling power than the short jaw with less damage to the part being removed

This puller is rated for maximum pull strength of 11 tons

OTC-1038 (Mechanical Grip-O-Matic Puller - 7 Ton, Long 2/3 Jaw) is designed for heavy duty pulling

For maximum effectiveness operate from both sides where possible

The Handle can be adjusted for different lengths of pipe by moving the set screw in or out of the handle

The jaw can be used at any angle because the wedge is not preset and pressure is applied with a turnbuckle

It has a 2 inch jaw and a 3 inch jaw, each with its own compression spring

The OTC OTC-1038 Mechanical Grip-O-Matic Puller - 7 Ton, Long 2/3 Jaw is used for pulling large and heavy items

To engage the jaw, just put it into position over the article to be pulled and push down

This Puller is designed to remove brake drums, hubs, etc

OTC-1038 () Mechanical Grip-O-Matic Puller - 7 Ton, Long 2/3 Jaw

This 2/3 Jaw, 7-Ton Grip-O-Matic Puller is a high quality mechanical puller that can be used to remove bolts, nuts and studs