Trane BRK4017 BRACKET

BRACKET

"24V 1/2""NPT 3-WAY VALVE"

The "24V 1/2""NPT 3-WAY VALVE" is used to direct the airflow

When closed, the entire discharge of the system will flow through this valve

The Trane VAL6481 "24V 1/2""NPT 3-WAY VALVE" is commonly used in equipment cooling and heating (1/2" NPT)

Trane VAL6481 "24V 1/2""NPT 3-WAY VALVE"

8A - 24VAC

The 24V 1/2""NPT 3-WAY VALVE will close on a temperature rise

This requires 24V and uses a proportional control module to regulate the temperature of the space

The Trane VAL6481 "24V 1/2""NPT 3-WAY VALVE" product has a current rating of 6

This valve is normally open and under control of a 24V (nominal) signal

From the Manufacturer

It is CSA certified

This valve is required to control a 1/2" (nominal) line discharge application

The valve closes when the air handler is off and opens when the air handler is on

The Trane VAL6481 "24V 1/2""NPT 3-WAY VALVE" has been designed to be installed in a Ducting system

The valve must be installed on a Trane system with a remote condenser with a 5-wire sensor, digital communicating thermostat, or conventional thermostat with 5 wires and compatible communication module; consult your local Trane dealer

Three-way valve for use with Trane air conditioners and heat pumps

The valve has a maximum relief pressure of 355 PSI, and a temperature limit of 250 Degrees Fahrenheit

The Trane VAL6481 "24V 1/2""NPT 3-WAY VALVE" is a 24 volt, 1/2"" NPT three way valve with an adjustable thermostatic actuator

The warranty for the Trane VAL6481 "24V 1/2""NPT 3-WAY VALVE" is FIVE YEAR ELECTRICAL PARTS, ONE YEAR COMPONENTS