Trane FUS0810 SurfaceMt Fuse Link W/SpadeTer SurfaceMt Fuse Link W/SpadeTer

SurfaceMt Fuse Link W/SpadeTer

They are typically used in homes and small buildings as an additional level of safety, so you can protect your property from damage and fire by using them with circuits that have a high risk of overload or are close to electrical service panels or other sources of power

Use this fuse link to replace a fused disconnect

The Trane FUS0810 SurfaceMt Fuse Link W/SpadeTer is available at Neuco Inc and comes with a 3 year warranty

Fused disconnects are devices that cut off electricity supply to a customer-owned electric circuit

The Trane Air Conditioning System includes many parts

The Trane FUS0810 SurfaceMt Fuse Link W/SpadeTer is a direct link replacement for the Trane FUS0810 SurfaceMt Fuse Link W/SpadeTer

These parts can be found at your local Trane distributor or at a website such as www

No Description

When the fuse link melts, it becomes part of the safety circuit, preventing damaging current from reaching other electrical parts in the unit

The FUS0810 is a surface-mount fuse link with ter in/out terminals

The FUS0810 SurfaceMt Fuse Link W/SpadeTer is a fuse for use with the Trane Air Conditioning System

Trane FUS0810 SurfaceMt Fuse Link W/SpadeTer

The Fusible Link W/Spade Terminals (Surface Mount) protects the air conditioner by providing an alternative path to ground in case of current overload

neucoinc

The fusible link will melt, disconnecting the circuit at a predetermined temperature and eliminating any further damage

FU-SL1 is a surface-mount fuse link with spade terminals that is compatible with TO-220/TO-247 type packages

FUS0810 Trane Fuse Link w/ Spade Terminals

It provides protection of the compressor and its internal components from overloads and shorts

The surface mount fuse link is rated at 10A, 125VAC, Bussmann type JFET® fuse technology and has an operating temperature range of -30 to 70C (-22 to 158F)

It is UL Listed

Replacing the fuse on a faulty switch, outlet or light fixture is easier than rewiring it, not to mention quicker and less expensive