Trane MOT1510 "1/2HP

"1/2HP

It features a two-speed direct drive motor and has a rating of 208 - 230/460V, 0

The Trane® BLW0361 2-Stage Induced Draft Blower is a single phase induction motor blower

It is intended for use with 90% efficient furnaces up to 90,000 Btu/hr

The Trane 2Stage Induced Draft Blower (BLW0361) features a 3-speed motor with the ability to push 230 CFM of air through your home or business

With an electronic limit switch, the blower will automatically shut off if it becomes damaged or overheated

The Trane 2Stage Induced Draft Blower BLW0361 is a replacement for the following models of Trane blower:

This unit has an ABS motor housing and is constructed using aluminum to allow for it to be light weight

This quiet inducer blower is ideal for air-cooled and water-cooled condensing units with two-stage gas furnaces and variable speed systems

It is an induction type motor that has high efficiency at lower fan speeds

The Trane BLW0361 2-Stage Induced Draft Blower is designed to be installed in a variety of applications

The Trane BLW0361 2Stage Induced Draft Blower is a 2-stage induced draft blower

It has a maximum air flow of 9,800 CFM and a sound rating of 94dbA

1 hp, 1 BLDC per phase, 1350/2400 rpm for 1 stage operation and 600/1200 rpm for 2 stage operation

The 46" x 48" x 20" blower has a removable filter that is washable for increased reliability and low freon requirements (R-410A)

It also uses a ball bearing motor that is lubricated by forced lubrication and has an integrated fan speed controller

The blower features cast aluminum construction, zinc plated bearings, epoxy paint finish and high temperature protection

The Trane BLW0361 2-Stage Induced Draft Blower is a direct drive, centrifugal blower that operates at voltages of 208 – 230 volts, 60 hertz and 1 phase

The Trane 2-Stage Induced Draft Blower is designed for residential and light commercial air conditioning systems requiring high static pressure for external venting applications

It can be used as a primary or secondary blower

The fan is made of galvanized steel and is resistant to corrosion, making it ideal for humid environments

The Trane BLW0361 2-Stage Induced Draft Blower has a 6› axial flow impeller that allows the airflow to be increased without increasing the noise level while it is running

The Trane BLW0361 2Stage Induced Draft Blower delivers 115,000 cfm while producing only a 140 CFM sound level

Trane 2Stage Induced Draft Blower,BLW0361

Fans and Blowers are designed to supply forced, induced or induced-draft ventilation for a variety of residential and light commercial applications

Its dimensions are 7" x 14" x 22"

The blower has a high efficiency, low sound rating of 1 sones at 115 Volts, 60 Hertz

This unit weighs about 70 pounds

The unit also includes a 6-foot power cord that plugs in to any standard 115V outlet

66/1

The motor on this model is 208/230V, 60Hz