Trane PIP0364 Molded Flue Pipe

Molded Flue Pipe

Trane PIP0364 Molded Flue Pipe Package includes a 3 inch x 8 feet 8 inch flue pipe with a male connector and a 4 inch x 14 feet 14 inch flue pipe with a male connector.

The Trane PIP0364 Molded Flue Pipe is a replacement flue pipe for your heating system. It is made of durable molded material and has a metallic lining.

Are you looking for a new flue pipe for your Trane gas heating unit? If so, you're in the right place. Trane's PIP0364 Molded Flue Pipe has the specifications you're looking for, matching your current unit perfectly. This flue pipe can be used for 90% of all residential installations. Particularly if the current system is failing or not working properly.

This Trane PIP0364 is a pre-assembled two piece molded flue pipe for 3.5" to 3.75" diameter pipes. It is designed to be used with the Trane XE1000 and ZB15000 packaged units.

The correct flue pipe is critical to the operation and efficiency of your heating system. This molded flue pipe from Trane is designed to reduce the potential for condensation, corrosion, and clogged chimney flues. It also provides a permanent, leak proof connection between a furnace or boiler and a chimney.

The flue pipe is made of ABS plastic to give years of trouble-free operation. The ABS plastic also makes identification labels easily applied for installation, operation and maintenance instructions. To make installation as simple as possible, our flue pipe part numbers represent the length (in feet) and flue pipe color (in black or white).

With our unique molded-pipe flue system, you get the protection of two inexpensive, flexible sections plus a third baffle section for added strength. The flue system's seamless joints allow air to flow freely through it and promote faster combustion—for unmatched efficiency.

Our Cast-Iron Flue Pipe is ENERGY STAR® certified. This pre-made chimney has 8" vertical pipe length.

A clean installation is a Trane value. This product allows for a greater margin of error when connecting to a chimney felt application. Designed to match the PIP 0264 flue, the flare fitting on the top is the same as most comfort system flue pipes eliminating the need for two fittings.

This R-410A flue conveys air from the indoor blower to outside of the building. It is part of a sealed, integrated flue system designed for use with air conditioner systems. This model has a flange to support the pipe insulation, an end plate to support weather stripping, and 6' 6" of 6" flue pipe.

Perfect for your Trane

Aeroflow systems are designed for installation on any forced air heating or cooling system, including hydronic heat. Aeroflow's patented Venting Adapters are designed with a precision fit to ensure an exact, leak-proof connection between the system, supply and return ducts, and the PVAC unit. First developed for HVAC consultants just like you, they have proven to be more accurate than forcing systems to flow test.