Trane THT2848 Limit Control 180/230f

Limit Control 180/230f

The Limit Control 180/230f can be used for single stage heating or cooling systems

Trane limit controls are designed to monitor water temperature and pressure in a hydronic heating system

The Trane THT2848 Limit Control 180/230f is a replacement thermostat

The unit is provided with one input and two outputs

The limit control will automatically reset once the temperature is brought back within the set range

The control is designed for use on unitary gas, oil or electric furnaces or heat pumps

This model is compatible with natural gas, propane, and oil boilers (2000 sq ft heating or cooling system)

The THT2848 Limit Control requires a 24-volt power supply, as well as a three-wire connection for communication in order to function properly

This can prevent heat damage to HVAC units by monitoring the temperature of heating media and triggering an electrical signal when temperatures exceed set limits

This item is very popular!

The Trane Limit Control provides a convenient method to control operation limits of the cooling system

If the limit control detects the water temperature or pressure going out of limits it will automatically shut off the system until the problem is corrected

TRANE THT2848 Limit Control 180/230f is perfect for you if you are looking for a new limit control

The Limit Control is designed to protect the compressor and other components from damage, by shutting off power to an air conditioner when indoor temperature rises above a preset level

It works with Trane and American Standard heaters, furnaces, and boilers

It helps to detect low voltage and high voltage conditions, as well as faults in the compressor circuit for added safety

With the Air Conditioning Limit Control, you can confidently operate a Trane air conditioner at the comfort level you want

The Trane THT2848 Limit Control 180/230°F is a thermostatic limit control that works in conjunction with a temperature-actuated device, and prevents the temperature of air-cooled and hydronic heating systems from exceeding preset limits

The Trane THT2848 Limit Control 180/230f is an intelligent thermostat, an easy-to-install and the most advanced solution for your home comfort system

The output relay closes when the room temperature reaches the set point and remains closed until the room temperature drops below the minimum setting

It is easy to install and works with all air conditioning systems that are factory-installed with programmable limit controls

The Trane THT230 Limit Control is designed to provide precise temperature control by using a signal from the temperature sensor to energize or de-energize the fan motor

The circuit can be installed on 230v, 208v or 120 v systems

The THT2848 Limit Control THT2848 is designed to control the airflow of the Trane XR13 and R19 air conditioners

The Trane Limit Control™ is a non-programmable, solid state, limit control that provides accurate temperature limiting in a heavy duty air conditioning or heat pump system