"TRIDICATOR
THE TRIDICATOR WAS DESIGNED TO EXPOSE THE SECTION OF TUBING BEING TESTED TO THE MAXIMUM POTENTIAL RADIANT ENERGY IN THE CABINET.
All-purpose pressure measuring instrument is designed to provide accurate readings above 100 PSI. TRIDICATOR is a low cost, high quality solution for all your pressure measurement needs."
THE TRIDICATOR industrial pressure and vacuum regulator is designed to be a safe and accurate means of applying precisely controlled and stable pressures to vertical or horizontal tubing. Normal atmospheric pressure taps off into the top of the diaphragm which is inverted to directly apply pressure on the diaphragm. This configuration prevents the use of high & low pressure gages or gauges that are found on other regulators.
The Tridicator is fitted with a high-precision thermocouple that measures the liquid in a liquid refrigerant circuit. It works with a permanent magnet and helical coil. The magnet is attached to the probe, coils wrap around the probe. A liquid expansion in the trace line causes a reduction in magnetic reluctance and induces a small voltage that is proportional to the fluid flow through the pipe. The TRIDICATOR was designed primarily for measuring liquid level in a pipeline system at pressures up to 1000 p.s.i.g., and at temperatures down to -40°F-20°C."
This bottom stem Tridicator has a 1/2" NPT connection on a 3" diameter face. The Tridicator is supplied with 1 each 3/8" RED, BLUE and GREEN insert tube.
The Tridicator is a 350°F/177°C continuous pressure gauge with a relative easy to read 1/2" NPT connection that is single-sided and has a 3" face. The gauge is bottom mounted.
Tridicator electronic temperature controllers regulate temperature from a predetermined set point to maintain even heating and prevent freezing or melting. Model PTC14403 is used in the meat, fish, poultry, egg products, milk, cheese and printing industries. The controller is installed within the refrigerated chiller cabinet, cold room or display case.