TRIPP LITE PDUMNV30HVLX PDU MONITORED 5/5.8KW 208/240V 20 C13 4 C19 LX PLATFORM 0URM TAA

PDU MONITORED 5/5.8KW 208/240V 20 C13 4 C19 LX PLATFORM 0URM TAA

Save time with TAA compliant PDU's that are engineered for the most mission critical applications. TRIPP LITE PDU's are available in a variety of configurations for all applications. All PLATFORM 0URM PDU's are individually monitored, allowing the user to pinpoint power problems quickly and efficiently. PDU's can support an individual or multiple loads from any location using MRC functionality, and provide maintenance bypass functionality to make access to the equipment easier.

The PDUMNV30HVLX PDU is a 5 x 20 A output AC power distribution unit with twenty C-13 receptacles and four C-19 receptacles. It can be mounted vertically in a 19" EIA standard rack, or horizontally in enclosures such as tables and wall cabinets.

The Tripp Lite PDU (Power Distribution Unit) provides clean power to network devices with AC output ratings up to 5.8 kW, using three 208 VAC or two 240 VAC inputs. The PDU features rear-access NEMA L6-20P inputs, sliding safety covers that lock the front-access outlets in place, and plastic front bezels that snap onto most equipment ranges.

This Tripp Lite Power Distribution Unit (PDU) features five C19 output slots, twenty C13 receptacles, seven branch circuit breakers, eight AC and eight DC power outlets, and a space-saving vertical design that optimizes racks with limited height and floor space. Designed for horizontal or vertical installation within 4U of standard 19-inch rack space, it distributes power by cords to equipment within the rack or across the floor.

The PDUMNV30HVLX 30A 208/240V 30-Space 19" Rack Mount Power Distribution Unit (PDU) provides individually metered power to racks and/or equipment. With its integrated fault detection control, the PDUMNV30HVLX is designed to help minimize downtime and service calls in a secure environment.

Switch to energy-efficient, digitally controlled operation with this Tripp Lite 20-Amp electronically monitored PDU. It comes equipped with four C19 receptacles, 20A circuit breakers and a 208V/240V input voltage. The unit is suitable for mating with optional rack or floor mount enclosures.

For cost-effective power supplies and storage of your critical IT resources, the Tripp Lite PDU-MNV30H is an energy conscious solution. It provides 30A/286.6W of load capacity with seven main receptacles for NEMA L5-30R branch circuits and four IEC C13 branch circuits with auto sense technology to optimize compatibility with power sources that may not be standard 120V/15A household outlets.

Designed to fit into standard 19" racks that are 42.5" deep, or slightly less on the front, this PDU can support up to six pieces of IT equipment. With its input voltage rating of 208V or 240V, this model can be used in North America or in other countries with different electrical standards. Overloading protection is inherent in the PDU, since each output receptacle is rated at 20A. A Status LCD indicates if there are any issues with the power to the unit or individual outlets, while an over-temperature alarm helps protect connected devices from damage. The PDU includes a Cable Lock port for keeping cords and cables secure.

The TRIPP LITE PDUMNV30HVLX is a high-quality device which comes with an impressive number of features.

Providing multiple power distribution throughout the workspace in a single cabinet or across multiple cabinets.