OTC OTC-7248 C Frame Press U-Joint, Brake Anchor Pin and Ball Joint Removing/Installing Tool.

U-Joint Removal/Installing Tool

This "3/8" Ram Half Coupler Dust Cap" is a product I came up with while looking at an old bench vise i had found in my garage

OTC 3/8" Ram Half Coupler Dust Cap OTC-9797

The 3/8" OTC Ram Half Coupler Dust Cap is a dust cap used to protect the threads on the half coupler on pneumatic equipment

I wanted to put a dust cap on the ram of the vise to keep sawdust and any other particle out of it, but didn't know where to find one, so i decided on making my own

D

The dust cap should be replaced every time you remove or install threads on the half coupler

5” Pneumatic Air Hose, Threaded Spring Loaded Swivel Adapter Assembly (1” NPT male thread), Threaded Ball Valve (1” NPT male thread), Schedule 40 Full Flow Ball Valve,

Half Coupler Dust Cap 3/8"-16 Threads Longer length dust cap provides additional protection to valve stem

O

9697 and other various pieces

This Item is Used to cap off an existing Ram to help prevent contaminants from entering through the end of the ram

The OTC seal on this product provides confidence that it meets our strict standards for safety and quality

OTC OTC-9797 () 3/8" Ram Half Coupler Dust Cap OTC-9797 (

75" I

OTC-9797 () 3/8" Ram Half Coupler Dust Cap

OTC-9797 (3/8" Ram Half Coupler Dust Cap)

It covers the threads to keep out dirt and to help protect the threads from damage

2-1/2" D

T

This cap is made of an injection-molded, high-impact phenolic resin for toughness and durability

) is a 3/8" Ram Half Coupler Dust Cap with a 1" NPT male thread, and can be used with our 1" and 2

This OTC product is a dust cap that fits over a 3/8” threaded ram half coupler