Johnson Controls AS-UNT1126-700 Unitary Controller,6 Out/2 In

Unitary Controller,6 Out/2 In

The Johnson Controls AS-UNT1126-700 Unitary Controller,6 Out/2 In contains a microprocessor based on a low voltage 32 bit RISC architecture with a one-time programmable, ROM resident operating system. Communication between the site equipment and the controller is via industry standard MODBUS RTU protocol. The controller can have up to eight channels of direct input data from the local monitoring devices, as well as two channels of high speed outputs to control local reversing or on-off solenoid valves. Data being read from the measuring devices at one location site is periodically transmitted to an Access Server through a

The Johnson Controls AS-UNT1126-700 Unitary Controllers monitor and control the operating temperatures of air conditioning and heat pump systems, both in residential and commercial applications. This Unitary Controller is designed with six (6) output terminals and 2 input terminals, and works in conjunction with a compatible actuator. The controller can be configured for gain scheduling or two stage heating and cooling applications.

Enjoy complete indoor comfort from a single, cost-effective solution. Johnson Controls' Unitary Controller provides convenient fingertip control of up to six electric baseboard or ceiling fan heater thermostats from a single location. With up to two inputs, you're always in control.

The Johnson Controls AS-UNT1126-700 Unitary Controller is part of the Air Conditioning Controls & Accessories product group.

The Johnson Controls AS-UNT1126-700 is a unitary controller with a 2 Input and 2 Output. This unitary controller is compatible with Johnson & Johnson's Unitary Building Systems and programmable communicators.

Johnson Controls Unitary Controllers offer a combination of advanced features and affordability, all available with the support of a single phone call.

The status controller monitors and controls Sun Tracker open-collector outputs and the safety shutdown switch. It receives inputs from safety tilt detectors, safety louver position detectors, and unoccupied detector probes. The status controller may be used with a thermostat to control a heating or cooling system to maintain a space at a set temperature. The AS-UNT1126-700 can be used in a variety of industries for applications such as window/door curtain tracking system, atriums, greenhouses, aircraft compartments, plant growth chambers, storage areas, HVAC, building automation controls, etc.

Built-in power supply. Modular, universal interface.

This is a new Aftermarket Unit, Not Original Equipment.

Move between heating and cooling with smooth, precise comfort. Control unit with LCD display is compatible with most existing thermostats. Open meter design allows for easy access to equipment, and serviceability whenever needed.

A building management system gives you command of heating, ventilating, air conditioning. Provides precision temperature control, maintains consistent conditions for optimal comfort. For use in commercial applications only.

Johnson Controls' proprietary iThermostat interface gives you the ability to wirelessly control your home's temperature from your compatible iOS or Android smartphone or tablet. Use our free app to customize your home by scheduling lighting, adjusting cooling and heating settings, and more from anywhere in your house. Our highly efficient heating system allows you to use a variety of energy sources, including natural gas, propane, electric resistance heat, and hydronic heat pump – no matter which way you go – you'll save money on monthly utility bills.