Johnson Controls 64766 Pneumatic Actuator Positioner, 3-13 psi

POSITIONER FOR V-3000-8011

Positioner for V-3000-8011 makes sure that a door, window or other pneumatic device stays properly closed and powered up. This pneumatic positioner is a replacement option for the actuator on Johnson/Tubular Products' V3000 Series drive motors or V3000 Series Solenoid Valves.

The Johnson Controls 64766 Positioner is a pneumatic actuator positioner with flow range 3 to 13 psi. It has a stroke of 7/8" and can be used for temperatures between 32 F and 180 F. This is a direct replacement for the V-3000-8011 Positioner

An electric actuator positioner that works with Johnson Controls V-3000-8011 to adjust the temperature temperature of cooled air. The adjustable temperature setting can be used to fine-tune the temperature of the cooled air during hot weather.

Outputs are 4-20mA or 0.5-10V Use with V 3000 8011 transmitters to indicate actuator position.

This positioner controls the position of Johnson Controls' V-3000 Series piston and cable operated valves (3 - 13 psi max). AC and DC motors can be used with this positioner. The positioner can be mounted remotely to the valve's air manifold. It operates by sensing the difference between the pilot pressure and pilot port. This actuator is constructed from stainless steel and includes a sensor, micrometer positioning adjustment, and wiring harness as well as a power cord.

The 64766 is a 3/4-HP Horizontal pneumatic actuator positioner that will be used on Johnson Controls' V-3000 Series Variable Speed Drives to control the position of an end thrust bearing. This actuator positioner is designed to deliver maximum torque at all times for precise positioning of the end thrust bearings in applications with varying motor load sizes.

This air pressure positioner controls a double-actuated Johnson V-3000 machine valve. It is a 0-10 psi positioner that has 0 first motion and a first motion at 7.8 psi. The actuator positioner operates up to 13 psi supply pressure and delivers 1/2 NPSM port connections.

The Johnson Controls 64766 Pneumatic Actuator Positioner (PN: 64766) is a pneumatic positioner for the E-8010, E-8030 and E-8010/1-DP8010-DP8010-DP8010 valves. Operating pressure range is 3 to 13 psi.

Designed to maintain control systems for pneumatic valve applications, these positioner's are suitable for OEMs, contract manufacturers and system integrators. They are small in profile and light in weight, therefore requiring minimal wiring when installed with other devices. The actuators include programmable set point temperatures (beyond the standard non-programmable) and serial communication between controllers, for quicker installations. There is also a built-in or external reset switch, so that loss or problems to the communication interface do not affect the positioner. Each positioner comes with a removable cap, which allows easy access to internal components without having

Johnson Controls 64766 Pneumatic Actuator Positioner, 3-13 psi

Whether you're installing a new gas fireplace or replacing an old one, this Johnson Controls Actuator Positioner is a key part in facilitating a stepless adjustment between off and full on positions. It enables you to create a variety of flame settings with a consistent heat output by sitting in line with your gas valve and moving it with the slide handle.

The Johnson Controls 64766 pneumatic actuator positioner prevents accidental operations. It is designed to be inserted between the pressure regulator and the pneumatic actuator to control excessive line pressure.