Johnson Controls 3641 Johnson Control Pressure-Actuated Water-Regulating Valve, 1/2" Connection Size

1/2" NPT. PRESSURE ACTUATED WATER R

Johnson Controls 3641 Pressure-Actuated Water-Regulating Valve, 1/2" Connection Size works with all 1/2'' NPT water pumps. With a durable cast body and a 304 stainless steel shaft, Johnson Controls 3641 provides years of reliable performance. It's pressure-actuated design means it turns on at 30 psi and turns off at 45 psi, providing optimum flow control for most irrigation applications.

The Johnson Controls 3641 1/2" Connection Size Pressure-Actuated Water-Regulating Valve has 1/2-inch Male NPT inlet and outlet ports to allow for connection with other types of devices. This 1/2" Connection Size pressure-actuated water valve is ideal for water systems that need to be turned on only after the system reaches a certain pressure. It features a stainless steel adjustable pressure release valve, which allows you to control water flow. This Johnson Controls direct-acting 1/2" Connection Size Pressure-Actuated Water Valve features adjustable bleed options at either or both ends of the actu

The Johnson Controls 3641 Hybrid Technology Pressure-Actuated Water-Regulating Valve fits 1/2" male pipe thread and has a threaded connection. The handle on the valve is used to control hot and cold water flow, as well as the temperature of the water. This Johnson Controls Pressure-Actuated Valve uses two diaphragms to control the flow of hot and cold water, and installs by applying pressure to either side of it. The valve opens at 15 lbs. and closes at 70 lbs. For optimum performance, always replace this valve with a similar Johnson Controls product or equivalent product

The Johnson Controls 3641 pressure-actuated valve has a single flow control and bimetal (alloy) construction. This Johnson Controls Pressure-Actuated Water-Regulating Valve is designed to provide hot water under a preselected pressure for metering applications, including domestic and commercial hot water service, space heating, water baths for soldering, and laboratory/industrial hot water supply.

Designed for use at low or medium service pressures, the 3641 is pressure-actuated water-regulating valve with a standard body, for use on hot- and cold-water supplies. It maintains a balanced pressure while reducing excessive water usage.

The 3641 is a pressure-actuated water-regulating valve that controls the flow of water through a closed system with a positive shutoff. It is designed for use on water systems up to 125 psig, and designed for manual reset of set point between 250 and 750 psig. The 3641 features a diaphragm actuator with a WP mechanical indicator and a Rugged cast-iron body.

This pressure-actuated water-regulating valve from Johnson Controls allows for precise regulation of flow rates of water, steam or hot oil with a working pressure up to 700 psi. The stainless steel body of this Johnson Controls 3641 Johnson Control pressure-regulated valve makes it ideal for commercial kitchens and other wet locations, and the polycarbonate handle provides a long-lasting performance with a secure grip.

The 3641 is a pressure-actuated, gravity-displacement water-regulating valve for regulating water flow via a diaphragm to the sprinkler system. The 3641 has a non-rising stem, 10 ft. actuator cable which controls water flow up to 10 GPM at 40 psi. Designed with an extra large cast iron diaphragm to withstand high head pressure up to 160 psi., the cast iron turret eliminates any metal failure at the mounting area

When it comes to balancing hot and cold water, the Johnson Controls 3641 Johnson Control Pressure-Actuated Water-Regulating Valve is a necessity. This pressure-actuated valve helps protect against freezing, while protecting the tank from corrosion and premature breakdown due to over heating.

The 3641 1/2" Valve is a self-contained unit consisting of "O" ring seals, diaphragm, spring seats, lead protection caps for hex stem and diaphragm adjustment screw, bronze body, solenoid coil assembly, pressure relief valve assembly with service indicator disc, one way compression valve seat(s) and plug screw.

Pressure-regulating valves from Johnson Controls water regulators set a new standard in the industry. Using an innovative spring system, they provide a quick response to pressure changes while maintaining a low differential compared to other regulators.

Using an advanced water pressure-regulating valve (PWV) like the Johnson Controls 3641 is the most common way to automate your sprinkler system. The 3641 can achieve up to 200 selectable on/off cycles per day, at pre-set times. It uses any standard sprinkler or drip zone valve as its controller, for ultimate flexibility in design and placement issues.