3/4" NPT. PRESSURE ACTUATED WATER R
The Johnson Controls 9485 is most commonly used in residential and commercial applications. It operates on a 0 to 15 PSI setting and a 0 to 5 PSI setting. The pressure range is an excellent choice for most any application that requires water flow. The Pressure-Actuated Water-Regulating Valve, 3/4" Connection Size is used in both residential and commercial applications, including:
Johnson Control brand Two (2) stage low pressure, Pressure-Actuated Water Regulating Valve (This valve may be used in the plumbing of a home with Well or Boarding House Plumbing systems).
A pressure-actuated valve with a 3/4" connection size. It is designed to help control water pressure and flow in commercial and industrial applications. It is suitable for distribution pipe work in domestic and light commercial applications.
Featuring a design that prevents drain tubings from freezing in harsh winter conditions, this water regulating valve features NPT connections, ball check valve for conditions with no return line, pressure actuated diaphragm valve for low water pressure areas, and slow closing spring loaded. This pressure-actuated water-regulating valve is designed to prevent pipes that are directly connected to meter boxes from freezing in the winter months.
The Johnson Control Pressure-Actuated Water-Regulating Valve is a required replacement for pressure-reducing valves where the thermal expansion valve has been removed. It requires no adjustment and automatically adjusts the water temperature as hot water usage changes. It includes a temperature limiting sensor, regulator assembly and an electrically activated valve that is intended to replace the thermal expansion valve.
This Johnson Controls Pressure-Actuated Mini Water Shut-Off Valve allows you to control the flow of water through your house by shutting off the water supply to specific faucets. Ideally suited for laundry rooms, bathrooms or utility sinks, it can be conveniently placed under a sink or counter. You can adjust this valve to accommodate up to 2/3 of the line pressure down to 1/3 of the line pressure. This Johnson Control Pressure-Actuated Mini Water Shut-Off Valve is an ideal solution for installation in homes with multiple faucets, which are difficult to access or are not next to each other. It
Water pressure-actuated, self-regulating valve is designed to reduce water usage by up to 70%. The flow regulator maintains a constant water level in your hot water holding tank by varying the heater's burner output. 60,000 BTU cast iron burner stands up to the toughest jobs.
This automatic water control valve regulates the flow of water to household fixtures according to demand. The pressure-actuated, single-port valve re-enforces incoming hot and cold water lines. It also protects the tankless water heater by isolating it from pressure surges or loss of water pressure caused by expansion or freezing.
A pressure actuated, or diaphragm valve is engineered to operate instantly on water pressure. A small amount of pressure must be applied to open this valve. This feature is especially important in certain applications where there is no source of constant water pressure. The valve is installed with the diaphragm sealed against the seat and port closed. When water pressure exceeds that setting of the adjustable spring-loaded plunger, the diaphragm opens easily without any effort on the part of the installer. The seal chamber behind the stem remains full of water throughout the cycle, which helps to prevent cavitation and erosion of the
The 9485 is a pressure-actuated valve that is designed for the purpose of reducing over-pressure conditions in a water supply system. This device consists of two primary components: a pressure vessel and a diaphragm assembly. The diaphragm assembly, when subject to increased pressure from water entering from the inlet port, will push against the pressure vessel to relieve this increasing pressure.
Designed for use on water pressure regulators that are installed in central city or remote well systems with static water pressure conditions. The Johnson Control 9485 is available in both brass and stainless steel construction.
With a Johnson Controls water-regulating valve, you can see never-before-possible savings for your commercial refrigeration and air conditioning system and food and beverage bottling and dispensing equipment. These devices govern the flow of condensate and absorption refrigerants in a variety of commercial systems, helping to maintain simple, stable, flexible operation.
Free Shipping
In stock
