Honeywell 68143 Small Body Low Pressure Integrated Valve with char

Small Body Low Pressure Integrated Valve with char

New and improved FB100 is now available. The Honeywell FB100 Small Body Low Pressure Integrated Valve is a fully integrated, low pressure, triple port 2.0 gpm gas shutoff, air-gas mixing and refrigerant control valve that has been redesigned to make installation easier than ever.

The Honeywell Low Pressure Integrated Valve with char is designed for residential gas volume control applications. The valve is suitable for use in low-pressure applications of 10-40 psig.

Integrated valve with check is for use on NATURAL GAS and propane gas low pressure boilers. Small body, low pressure integrated valve with check. Certified, listed and marked in accordance with UL 100 as required by the Building Code Council of Ontario and CAN/CGA B149.2 when installed per installation instructions.

The Honeywell 68143 low-pressure integrated valve with char burners offers a variety of controls including pilotless ignition with knockout burner. The integrated char burners create clean, high-heat flames for a more efficient fire box and higher heat transfer rates. The solid brass body allows greater fluid film thickness and improves heat transfer to the water, resulting in better efficiency and higher Btu output per pound of fuel consumed.

The Honeywell D17000 is a small body low pressure gas valve used for operating appliances such as clothes dryers and ranges.

MINI-V Lp-Integrated Valves are small body, low pressure (104 psi) valves designed to provide the most compact, efficient alternative for control of building heating and cooling systems. As a sub-component of the MINI-V Integrated Control System (ICS), they are compatible with the MINI-V Integrated Control Panel (ICP) and with modules from other manufacturers.

The Honeywell low pressure integral valves are designed to provide humidification for heating and cooling systems or as part of an automation system. The valve is a direct acting, closed body design with two core electrical wires in the capillary of the control valve. An integrated capillary in the main valve allows for easy installation and field serviceability without removing the seat from the radiator. available for gas vents with 1/2" to 2" connections and steam vents with 3/4" to 2" connections.