Johnson Controls 170157 24V ELECTRIC NON-SPRING RETURN BALL VALVE ACTUATOR

24V ELECTRIC NON-SPRING RETURN BALL VALVE ACTUATOR

The Johnson Controls 170157 24V ELECTRIC NON-SPRING RETURN BALL VALVE ACTUATOR appears to be a product only manufacturers by the company would sell.

Johnson Controls 170157 24V ELECTRIC NON-SPRING RETURN BALL VALVE ACTUATOR

Johnson Controls 24V ELECTRIC NON-SPRING RETURN BALL VALVE ACTUATOR helps regulate the flow of any liquid or gas under pressure. The valve is normally closed, but opens when the actuator shaft is turned, creating a passageway for flow. Ball valves are more reliable than gate valves because they are more tolerant to vibration. They handle higher pressures, and they are easier to adjust.

This Johnson Controls 170157 24V ELECTRIC NON-SPRING RETURN BALL VALVE ACTUATOR is an original equipment replacement part for select Johnson Controls Metasys® RTUs. The valve is intended for use on electric non-spring return ball valves only.

You can control temperature, humidity, and more in your unit with the Johnson Controls 170157 24V Electric non-spring return ball valve actuator. It's made of electroplated zinc that will resist corrosion in the extreme environments found in HVAC systems. This easy-to-clean, weather resistant ball valve is designed to be permanently lubricated for longer wear. We also offer installation services for this product. Contact us at 877-646-3300 for more details.

Our QUADVIN engines provide a single-cylinder design solution for higher horsepower, reduced weight and improved fuel efficiency. They are offered in a mid mount configuration, on the front of the vehicle or as a swing set to either side of the truck body providing easy access and servicing capabilities. Non-spring return ball valve actuators with integrated motor is designed to work with 12 V DC signal voltage signal voltage input with logic output is used to control the direction of valve operation. This version comes with a motor output rated at 1.0 hp, producing power ranging from 0 – 20 ft lb and delivering up to 2.

This electric actuator is a non-spring return ball valve, meaning that there are no springs to wear out or fail. This particular model is rated for an operational pressure of 150 PSI which it can be used in systems up to 1000 PSI. The gear train has a speed range of 0 to 24 rpm with a 24:1 gear ratio, offering an excellent control resolution.

This 24V ball valve is recommended for residential, commercial, and industrial applications. Advanced construction techniques using a forged brass body allows for better performance in high temperature applications. This ball valve is non-spring return, designed to control the flow of air, gases, liquids and solid materials in closed circuits. It comes with a plastic package

Nearly identical to the 162457 product listed below, this Johnson Controls 24V electric ball valve is designed for general control and instrumentation applications. It features a range of 2-6" waterway, self-cleaning design with large open area to speed up any process, adjustable pilot operation, stainless steel ball check for long life, stainless steel bonnet for corrosion resistance.

Simple design and operation incorporating an adjustable stop, Quick connect thumb screw for easy installation, Compact size and light weight makes them ideal for use in confined spaces or applications requiring low weight, Adjustable slide stop at the top of the actuator provides repeatable strokes of the valve.

A great addition to any system that needs a mechanical advantage for a valve or pump. The 170157 works well with Johnson Controls' Envirosmart Thermostat.

Ball valves are used for controlling fluid flow. The ball valve has a spherical body with one or three ports, and is rotated to control the flow of liquid among the various port openings. When open, liquid flows through the valve into or out of the pipeline. When closed, liquid is completely shut off from flowing into or out of the pipeline.