Honeywell 13400 - 120V TWO-POSITION ON/OFF 2-WIRE + COMMON ACTUATO

120V TWO-POSITION ON/OFF 2-WIRE + C

The Honeywell 13400 - 120V TWO-POSITION ON/OFF 2-WIRE + COMMON ACTUATO is a 120V AC two-position (ON/OFF) switch. It has a grounded 2 wire + common actuator with rated current to 0.175A at 120V and rated voltage to 760VAC. This switch is normally open and normally closed with a momentary contact and has plastic terminal cover. This switch will work with non-Honeywell devices too.

The D3179 5RH TWO-POSITION ON/OFF 2-WIRE + COMMON ACTUATOR is a 120V, single unit device used to control a two-wire potentiometer loading device, such as an electric curtain motor. This low voltage (120VAC) on/off switch mounts to the window frame and is often used in combination with a pull string to control the curtains or shade.

Two-position 120V rocker switch. Acts as a two-wire 120V ON/OFF switch for controlling ceiling fans and smaller motors, or as a two-wire and common terminal 3-wire ON/OFF/ON switch for controlling industrial motors. Perfect when used with motor control centers if you need a 2-wire plus common or 3-wire installation.

The HON 2-Wire 120/240Vac 2-Position On/Off Common Actuator is used for replacing one on a faulty thermostat. Replace the actuator inside the thermostat with this component.

The Honeywell 13400 is a programmable two-wire power actuated two-position switch used to operate lighting and other loads.

This low voltage, 2-position control is designed for use with electric fence energizers. This incandescent light is available with either a common or normally closed contact. The actuator is cast from aluminum alloy and it comes with a weatherproof nylon cover. It requires two #10AWG wires, 20' long and has a rated load of 150 VA (90VAC) or 10W at 200VAC.

Basic pushbutton fan control switch. This single pole switch controls a ceiling fan or ceiling light fixture from two locations-centrally or at opposing ends of a room. Black plastic face. Screw terminals. Toggle operation. 120VAC/60Hz, 0.15A