Honeywell 13400 - 120V TWO-POSITION ON/OFF 2-WIRE + COMMON ACTUATO.

120V TWO-POSITION ON/OFF 2-WIRE + C

The Honeywell RTH6120B1000/N - 120V TWO-POSITION ON/OFF 2-WIRE + COMMON ACTUATOR Battery Backup Canister Humidifier removes excess moisture from the air which helps keep your family healthy. This humidifier is easy to use, with three humidity levels and a push button control for easy on/off operation. The collection tank has a 1.25 gallon capacity for longer run time between refills, and the demineralization cartridge minimizes white dust buildup on furniture and floors.

The Honeywell 13400 - 120V TWO-POSITION ON/OFF 2-WIRE + COMMON ACTUATOR is a 3000 Series 2-wire, normally closed (N.O.), electrically operated solenoid valve controlled by two line voltage 0-10VDC signals which are either normally open or common. The valve provides low resistance fluid control and can be made to close or open upon application of electrical power.

This Honeywell 13400 120V two-position on/off 2-wire + common actuator is designed to open and close electronic, cassette-type valves for a variety of uses. The mounting height is 5'' from the top of the close position switch. The medium carbon contact (MCC) is normally closed. This actuator is made of metal housing with aluminum control assembly.

The 13400 is a 120 volt two-position ON/OFF two-wire + COMMON ACTUATION wall switch with mounting plate. It is designed for use with electronic low voltage lighting, heating, and electronic room air-conditioning control systems and appliances. Additional features include an adjustable OFF-NORM temperature sensing control, a built-in lamp test, a metal strap that may be wrapped around the switch in the ON position to restrict travel for use with pull cords, and a CROWNSTONE screw terminal block for extension wires. With a manual override feature, this switch must be hardwired; it can't

The Honeywell 13400-120 is a 120VAC, two-position, normally closed, 2 wire + common acting actuator with no coil options. Capable of switching up to 25 Amps, this item sports a metal tab on the shaft that can be used to ground the switch. The actuator is designed for easy installation into a panel cutout. The actuator requires 0 travel to engage the switch and has an actuating knob that is .25" in diameter and 6" tall.

The Honeywell 13400 Wall Switch is a two position wall mount switch. This switch comes with a 1/2 in straight lever switch for easy installation. The Honeywell 13400 has a white housing and uses a 2-wire + common actuation system. The Honeywell 13400 was designed in an angled style used to replace a single pole switch in your household.

Honeywell 13400 - 2-Position On/Off Control Switch with 3-Position Room Temperature Control