Veris Industries PWXX05S 0-250 psig Differential Pressure Transducer

0/250# Wet # Xducer

Affordable 0-250 psig Transducer with a built-in 5V pulsed output for Veris Compliant 0/250

Our PWX 0-250 differential pressure transducer is suitable for use in a variety of applications, including pH and conductivity measurements. It features a stainless steel body with a shaft seal made of viton rubber, and packages the industry-standard #14 screw connection, which is compatible with many common probes. This transducer comes in a wide range of sensitivities, allowing for use in various process applications. Wiring harnesses can be customized for specific applications.

The 0 to 250 PSI absolute and differential pressure transducer operates with a pressure range of 0 to 250 PSI, at 25 PPM H 2 O. This unit features an accuracy of +/- 1% full scale (0-250 PSI). The electrical interface consists of a 3/8" NPT conduit union and 2-terminal configuration measuring X1 and X2 outputs. The cable length is 500 feet with ground wire.

"VeriSens, Differentials Pressure Transducer, AE25DR25, 0-250 psig differential pressure transducer"

This Veris Industries PWXX05S 0-250 psig Differential Pressure Transducer offers high accuracy pressure sensing for use in industrial applications. This transducer has dual pressure ranges of 0-250 psig and 250-0 psig to suit your needs. It is constructed with a stainless steel shell, a 316 SS bezel, and a PFA diaphragm for long life and durability.

Our PW series transducers are ideal for pressure monitoring, level and flow measurement applications in the oil & gas, chemical, power generation, process control, wastewater treatment and industrial markets. The TW transducer selection offers 0-250 psig, 0-10 psid or 0-5 psid ranges.

The PA Series of differentials have a standard 1/8 NPTF inlet and outlet connection. Differential pressure sensors are ideal for measuring pressure differentials across a flow control device such as a throttle valve or at the restriction point of a process. They can also measure leakage from a reservoir, air relief valve, or high pressure dump point. The differential pressure is measured using an absolute pressure transducer positioned in line with the process fluid stream. The measured differential pressure is converted into an electronic square wave signal which is used to energize a solenoid-operated pilot valve, for example, or actuate an instrument