Veris Industries V100 RelayInBox 10-30vac/vdc 120vac

RelayInBox 10-30vac/vdc 120vac

The Veris RelayInBox 10-30vac/vdc 120vac is an ultra-compact programmable power relay box. It has eight AC and four DC voltages, selectable via a rotary switch. The lead wires can be hard wired to the input or output terminals. Also equipped with SCR/E.O. opto-isolated outputs that enable the isolation of electrically noisy devices such as motors and solenoids. This would allow the Control Systems Engineer to take AC line input and transform it to DC signals required by a control application such as motor or solenoid

Our RelayInBox is a 10-30VDC 120VAC relay device that allows any piece of automation equipment or sensor to be controlled via automation software or manually. It has 5 relays that can handle up to 5A @ 120VAC @ 30VDC.

The RelayInBox makes system configuration fast and easy for OEM applications; RelayInBox is an Ethernet-based device that can switch three pairs of isolated 10-30VAC/VDC contacts at 120VAC. It offers a variety of communication interfaces: TCP/IP, MODBUS RTU, and industry standard protocols such as BACNet and LonTalk. The RelayInBox is RoHS-compliant and is available in two models: an integrated power supply and a remote-power option.

The RelayInBox is a digital input control and monitor that plugs directly into the V100 veriFlex Interface Module. The RelayInBox controls high current, low voltage AC and DC loads up to 1000 watts and is directly compatible with VERISEQ, VERISIQ, VERICOMFLEX, VERISIMON and VERIRAMP equipment. The RelayInBox provides 10 to 30VDC output to a single AC or DC heavy load.

The RelayInBox is a compact, modular control system designed to provide an easy way to connect your inputs and outputs so that they can be switched locally or remotely from an iOS device. With the free app available in the App Store, you will stay connected from your iPhone or iPad wherever you are. The V100 includes 10 SPDT Relays rated at 15A@30VDC. The V100 is ideal for controlling lights, motors, solenoids, and other loads on larger projects.

The RelayInBox, V100, is designed to protect the output of a relay module from damage caused by transients on the input signal. The V100 can protect a relay module that uses up to 100 amps at 120 volts or higher. A Dual Watchdog circuit is included in the RelayInBox to allow for redundancy of critical relay systems.

The RelayInBox is a prewired relay panel. The RelayInBox can be configured into multiple custom relay panels from one unit. It is small enough to fit in most breaker box panels, while still allowing for easy access to the relays.

RelayInBox 10-30vac/vdc 120vac

The Veris RelayInBox 10-30vac/vdc 120vac is an ultra-compact programmable power relay box. It has eight AC and four DC voltages, selectable via a rotary switch. The lead wires can be hard wired to the input or output terminals. Also equipped with SCR/E.O. opto-isolated outputs that enable the isolation of electrically noisy devices such as motors and solenoids. This would allow the Control Systems Engineer to take AC line input and transform it to DC signals required by a control application such as motor or solenoid

Our RelayInBox is a 10-30VDC 120VAC relay device that allows any piece of automation equipment or sensor to be controlled via automation software or manually. It has 5 relays that can handle up to 5A @ 120VAC @ 30VDC.

The RelayInBox makes system configuration fast and easy for OEM applications; RelayInBox is an Ethernet-based device that can switch three pairs of isolated 10-30VAC/VDC contacts at 120VAC. It offers a variety of communication interfaces: TCP/IP, MODBUS RTU, and industry standard protocols such as BACNet and LonTalk. The RelayInBox is RoHS-compliant and is available in two models: an integrated power supply and a remote-power option.

The RelayInBox is a digital input control and monitor that plugs directly into the V100 veriFlex Interface Module. The RelayInBox controls high current, low voltage AC and DC loads up to 1000 watts and is directly compatible with VERISEQ, VERISIQ, VERICOMFLEX, VERISIMON and VERIRAMP equipment. The RelayInBox provides 10 to 30VDC output to a single AC or DC heavy load.

The RelayInBox is a compact, modular control system designed to provide an easy way to connect your inputs and outputs so that they can be switched locally or remotely from an iOS device. With the free app available in the App Store, you will stay connected from your iPhone or iPad wherever you are. The V100 includes 10 SPDT Relays rated at 15A@30VDC. The V100 is ideal for controlling lights, motors, solenoids, and other loads on larger projects.

The RelayInBox, V100, is designed to protect the output of a relay module from damage caused by transients on the input signal. The V100 can protect a relay module that uses up to 100 amps at 120 volts or higher. A Dual Watchdog circuit is included in the RelayInBox to allow for redundancy of critical relay systems.

The RelayInBox is a prewired relay panel. The RelayInBox can be configured into multiple custom relay panels from one unit. It is small enough to fit in most breaker box panels, while still allowing for easy access to the relays.