Johnson Controls 283038 VG1245ADH923BUA "1/2"" 2W 1.2Cv 85-264V 2POS N/O"

1/2" 2W BALL VALVE 1.2CV; SS TRIM; HI TEMP LINKAGE

This Johnson Controls 1/2" 2W Ball Valve 1.2CV is used in the industrial process industry to control the flow of liquids or gases through piping systems. It can be used to measure temperature, level, and pressure for industrial uses.

The JCI VG1245ADH923BUA 1/2" 2W Ball Valve 1.2CV is a replacement component for the following systems: JCI 283038-1; Carrier 283038-1.

Johnson Controls 283038 VG1245ADH923BUA "1/2"" 2W 1.2Cv 85-264V 2POS N/O"

This Johnson Controls 1/2" 2W Ball Valve has a brass body, silver ball, stainless steel nipple, and silver spool. It features a N/O non-fail open contact type, 180 degree orientation, 1/2" female NPT inlet connection, 1/2" male NPT outlet connection, maximum temperature rating of 264 degrees F, voltage rating of 85 to 264 volts AC at 60 Hz, current rating of 0.75 Amps DC at the contacts only, the mechanical travel is 0.25 inches, and the electrical travel is 0.38 inches.

The VG1245 is a 1/2" Ball Valve in Stainless Steel with an Adjustable Feet and Commercial Linkage. It is ideal for low pressure (gravity flow) liquid systems such as condensate return, natural gas supply and liquid re-boilers.

Intelligently designed, the Johnson Controls 1/2-Inch Two-Way Ball Valve is a fraction of the cost of other valves equivalent to it. This Johnson Controls ball valve was engineered with a

Featuring a 1/2 inch valve with N/O control and versatile mounting options, this Johnson Controls ball valve is perfect for use as a hand valve, control valve, or as a spool/turbine in small to medium sized heat transfer applications. With excellent starting characteristics and long service life, this Johnson Controls ball valve meets both commercial and industrial requirements.

The VG1245ADH923BUA is an industrial grade double-vane, two-way, full port ball valve with a 1/2-inch female NPT inlet and outlet ends. The ball valve has a ball height of .715". It features a rated maximum operating pressure of 250 psig and a quick connect/disconnect on the end of the bonnet.

This Johnson ball valve provides a variety of flow control applications for gases, liquids, and slurries.

A new generation of compact, soft start ball valves for commercial refrigeration, air conditioning systems and heat pumps.

These special purpose valves switch current up and down off a single point. With no moving parts these valves switch high voltages on and off at a high frequency.

Matching the Johnson Controls VG1245ADH923BUA, you can find ball valves in all shapes and sizes. Regulating flow is very important in HVAC systems, so having the right valve for this job is critical. Ball valves are extremely important to many plumbing systems. They control the flow of water between two points, and allow shut-off during maintenance procedures.