Johnson Controls 283285 3/4" 2W BALL VALVE 4.7CV SS TRIM SPRING CLOSEDON/

3/4" 2W BALL VALVE 4.7CV; SS TRIM SPRING CLOSEDON/

If you're looking for a Johnson Controls 283285 3/4" 2W BALL VALVE 4.7CV SS TRIM SPRING CLOSEDON/ FACTORY SEALED price. This is the place for you to definitely buy in specials price and save money.

The Johnson Controls 287405 3/4" 2W BALL VALVE 4.7CV SS TRIM SPRING CLOSEDON/

Johnson Controls' 283285 3/4" 2W Ball Valve 4.7CV features spring closed-on and is an excellent option for commercial or residential applications. This item is made of carbon steel, and has a steel bonnet. Its maximum temperature is 180 degrees Fahrenheit, and its minimum temperature is -20 degrees Fahrenheit. It has a maximum pressure of WOG/ASTM 150#, and its NPSH resistor is 11.0 feet. It also has a faceshield size of No 1, plug type 2W 2W, working volume 4.7in^3, flow rate 2L

The Johnson Controls 2W Ball Valve 4.7CV (283285) has a 2 W opening and was made of forged brass. It is for use with gases and liquids or steam and water applications and can operate under continuous pressure, conditions of intermittent pressure and temperature ratings of 40? to 180? and 150 PSIG to 3 PSIA. The valve can handle media like natural gas, butane and LP gas, nitrogen, hydrogen and air as well as the following: air, anhydrous ammonia, argon, carbon dioxide, chlorine, ethylene, high purity gases, high pressure steam,

The Johnson Controls 2W ball valve makes it easy to adjust the water pressure in your shower. It has a brass body with stainless steel trim and washer, plus a spring-loaded closed-off leak-proof disc that makes the valve leak-proof.

When handling dangerous liquids, equipment must be built to the highest standards to ensure safety. That's why Johnson Controls' ball valves are made of stainless steel, with tight-sealing trim springs that provide tight closure and end leakage. You can depend on these valves to produce a steady flow of fluid at high pressure without clogging or slowing down, because they have fully-machined, internal components that are extremely durable. With this quality product, you'll be better able to increase production by turning up the flow rate—all while reducing cost per unit. Get consistent results every time you use it.

Open your door to the world of ball valves with Johnson Controls' four-way, quarter-turn ball valve. Featuring a side outlet design, this ball valve features a stem position locking device and a stainless steel trim spring. Welcome to the Johnson Controls family.

The 2W Ball Valve is used as a switch for controlling the flow of liquids and gases. It is designed to handle liquids and gases up to 625°F (327°C). The 2W features a stainless steel body and trims and a stainless steel ball and seat, which allow it to withstand high pressure applications and harsh chemicals.

Johnson Controls Inflow Inflow Inflow Inflow Inflow Inflow Inflow E Connector Outflow Outflow Outflow Outflow Outflow Outflow Outflow Out Flow Out Flow Fitting, 3/4'' Port Size, 2 Watt, Can Be Used With 4 7CV Gully or Wet Well Pump, Plastic Body Switch Box

Johnson Controls industrial valves are the top choice of the industrial and OEM markets. Choose from a variety of styles to find a perfect valve for your industrial application. Below you will find a full range of industrial valves available from Johnson Controls.

We design controls that work the way our customers' equipment works. Every piece of equipment is smarter with Johnson Controls. Our products help you get the most out of every drop of fuel, every watt of power, and every minute of operation.

Product Description