Johnson Controls 283312 3/4" 2W BALL VALVE 4.7CV SS TRM NSRVA9104-AGA-3S

3/4" 2W BALL VALVE 4.7CV; SS TRM NSRVA9104-AGA-3S

This ball valve is 3/4 inch in size. It has 4.7 cubic velocity (CV). This ball valve has stainless steel trim on stainless steel seat ring (SS TRM). This valve has NSRVA9104-AGA Series design type.

The 283312 3/4" 2W Ball Valve 4.7CV is a 3/4" trim application valve designed for use with a service loop. It has a pneumatic pilot and solid state switching capability. The solenoid valve itself blends into the architecture of the loops and other system components. All valves have been designed to be easy to install and maintain, reducing any possible impact on productivity. This model meets NSPI & CSA approvals and has a 5 year warranty.

Johnson Controls 3/4" 2W Ball Valve, 10 Position 60 deg. Angle Trip, Stainless Steel Handle and Seat, 1/8" NPT Port, Atmospheric Applications: Uses Include Gas and Steam. Material: Body and Handle: Stainless Steel --- Other Parts: Zinc Plated Steel

The Johnson Controls 283312 2-Way Ball Valve is used for diverting flow to another line or closing off the flow of liquids or gases. It is made of 304 stainless steel and has 1/4" diameter stem ports with 1/4" male NPT threaded connections. This unit is CSA listed, tested for use up to 250° F (120° C) and complies with UL Standard 61E/CSA B125 for Federal systems.

Expands to perfectly fit any 3/4" outlet. Built on the popular BrassCraft brand, this valve is designed for extended durability and long service life. It is housed in a durable weather resistant thermoplastic resin body that resists wear, rust, corrosion and water damage. It is ideal for use on commercial or residential applications, including cold water or hot water installations, as well as gas or oil appliances.

These Ball Valves are used to regulate the flow between two chambers within an air circuit. Each valve has both manual and automatic control. Each valve has two ported openings, one port for exhaust air flow direction, one port for air flow direction. The exhaust port opens by allowing the ball to float up while the air port will close by letting the ball float down. These valves are manually controlled. Both these ports are opened or closed by rotating the handle 90° in the appropriate direction.

Get the best deals on ball valves with fast, free shipping from Johnson Controls. They have a wide selection of brass and stainless steel ball valves to choose from so you can find exactly what you need for your application.

The DC4 ball valve is designed for dry process applications, allowing the control of gas flow in plumbing systems for industrial heating and cooling, refineries, chemical processing and power generation.

Control electronic gas valves to help regulate the fuel entering the engine system or furnace by using Johnson Controls® ball valves. They are available with Nylon Stem Seats (NSS), Stem Assembly (STMA), Stem Expansion (STE), Stem Nut (SN), Strainer (10SR) or without strainers, and supply valves for fuel, natural gas or propane.

This ball valve features a single outlet that is non-stem controlled with the stem placed 90° from the outlet. Stainless steel construction provides excellent resistance to corrosion. A two piece bonnet with gland insert is standard, but...

Ball valves are used for direct control of liquids, gasses or steam by manually rotating one or more balls into a seated position in a valve. Ball seated valves are often used in the chemical process industry.

With the MotorMaster® Valve, you can enjoy peace of mind knowing that your heating system is protected under all conditions. The MotorMaster® Valve delivers intelligently managed system redundancy to satisfy the most demanding service requirements. Preset set point settings allow for customized comfort control, reducing utility costs and maximizing occupant comfort.