Johnson Controls 283455 VG1245CN+943BGA "1"" 2W 11.7Cv 24V 2POS S/R N/C "

1" 2W BALL VALVE 11.7CV; SS TRIM SPRING CLOSEDON/O

Johnson Controls 283455 VG1245CN+943BGA "1"" 2W 11.7Cv 24V 2POS S/R N/C " ball valve is constructed of stainless steel with a polished finish. The ball valve has a shut off position. The ball valve has a coil spring closed on position and no shut off position, With finger lever operation with finger guard protection, 1" female pipe thread inlet, 1" female pipe thread outlet, Accommodates piping with an OD of 0.315" inch to 0.654" inch

The Johnson Controls 2W/2-position 11.7 Cv Ball Valve has screw connections of 3/4" and 1." It has a rated flow of 11.7 cv and a maximum pressure of 150 psi. Its ball valve type is butterfly and stem is mechanically operated.

The Johnson Controls 283455 VG1245CN+943BGA "1"" 2W 11.7Cv 24V 2POS S/R N/C " is designed to be independent of ductwork and needs no spare parts. It's maintenance free.

Johnson Controls 283455 VG1245CN+943BGA "1"" 2W 11.7Cv 24V 2POS S/R N/C (Mfr. P/N: 283455)

The VG1245CN-943BG-A is a 2W, 11.7 A/C or D/C, 24 VDC or 48 VDC, normally closed solenoid valve with stainless steel stem and fittings. It has a Buna-N diaphragm and a spring-clamped ball seat which is screw-tightened with a thumb wheel for easy access. The actuator mount is silver alloy.

The Johnson Controls VG24CN ball valve, designed for use with low pressure gas, allows for easy shutoff and quick directional changes; it is made of steel with a stainless-steel trim that features PTFE seats to help prevent any build-up of particles.

When engineering Johnson Controls 2 Position Ball Valves, safety was first on the list. Our ball valves feature the unique Color-Keyed seat design, reducing seat galling and corrosion due to flamed seat contact. The temperature range of the valve is also important for safety reasons. All valves are designed with a flute coefficient that permits higher temperature operation without excessive wear or fluid contamination.

This solenoid valve controls fluid flow in heating and cooling systems. It is normally closed and opens when a current is applied to the coil, such as when the contactor completes the circuit by its magnetic force. The coil contains two wires. If one wire is connected to the solenoid coil and the other connected to the actuator's control terminal, it will enable 12V AC servo motor instantly and stop at a predefined point.

The VG Series with built-in flow control is a general purpose valve that can be used as a shut-off valve, as a pressure regulator as well as a flow-control device. It provides positive, metered flow for precise control of solids with flow being proportional to the modulating signal. Excellent for use in chemical, petrochemical and process industry applications.

A ball valve is a type of hand operated valve most commonly used in the water and gas industries, but also suitable for use with many other fluids.

This valve is intended for use with portable and stationary refrigeration equipment, as well as air conditioning equipment

Keeps pool water sanitary