Johnson Controls 283511 VG1245CPH923BGA "1"" 2W 18.7Cv 24V 2POS S/R N/O"

1" 2W BALL VALVE 18.7CV; SS TRIM; HI TEMP LINKAGE;

The Johnson Controls VG1245CPH923BS24 is a 2W 1" Steam Ball Valve made up of Steel with SS Trim, Hi Temp Linkage. It has an operating temperature range of 200°C to 480°C, Max Pressure 250 psi. The Electrical Rating of this valve is 24 Volts, Max Current 2 Amps.

A ball valve controls the flow of a fluid. It consists of a ball and a rod secured by a nut and washer, and rotating within a circular shroud. This particular 1"" ball valve has an SS trim and Hi Temp Linkage.

Set your own prices with the 2 Watt Ball Valve, manufactured by Johnson Controls. It has an 18.7 Cv flow control. For use in many applications, this valve is used for heating and cooling systems. It has a stop to stop flow. This S/R valve will do nicely in any application you can think of.

When replacing a valve for a solvent type of application, it is critical that the replacement valve is 100% compatible with the system. The Valve Guide 2W Solvent Valve is a new, space saving style ball valve compatible with all solvent based systems. Ideal for use in smaller vessels and pumps rated at up to 82 PSI at pipelines and valves up to 18.7 CV.

The Johnson Controls 2W Ball Valve with NPT Male inlet is constructed with rugged impact resistant phthalate-free PVC construction. It is factory assembled with float trip, regulator not included. This ball valve has polypropylene end bell and top of handle support structure.

The VG1245CPH923BGA is a 2-position ball valve, ½" female pipe thread. This ball valve has a 1" flow area, 18.7 fluid capacity handle position, and 923 ft head design. Operating temperature is higher than ambient temperature for cold weather applications.

The VG ball valve is a heavy-duty, full-port valve with cast metal lever handles and bonnets, and a stainless steel frame to prevent rusting. This ½" ball valve has a 2-way power position.

Hi-Temp ball valve is constructed of non-magnetic Nicrofer SS316/SUS316 stainless steel for strength, durability and chemical resistance to steam. Hi-Temp ball valve can handle up to 250°F continuous. Its compact body style is perfect for manual control applications, while its solenoid/direct drive compatibility fits microprocessor driven equipment, providing easy integration into your existing machinery

Our 1/2" Nominal size, Class 150 to Class 2500 positive angle Ball Valves are designed for sanitary, low pressure water distribution. These ball valves are used in residential drinking water systems, irrigation systems and other low pressure applications.

The Johnson Ball Valve is designed for use with heating and cooling systems. The ball valve isolates a specific section of a main line, which enhances control and increases efficiency. They are made from a zinc-coated cast iron body and handle for maximum durability.

Operating by a pilot or line pressure, the VXB is fully proportional and has a small pilot chamber for precise control. Spring returns pilot to neutral when pressure is removed. The popular ball-in-seat valves provide positive operation with low pilot/operating pressure.

Industrial valves are used in applications including manufacturing, commercial construction, mining, wastewater treatment, water and gas transmission.