JOHNSON CONTROLS VG7000-1005 VG7000-1005 SPRING KIT V-3000 ACTUATOR 4-8 PSI

SPRING KIT V-3000 ACTUATOR 4-8 PSI

This Johnson Controls V-3000 Spring Kit (4-8 psi) is designed to fit the following actuators:

The VG7000-1005 Spring Kit For Johnson Controls V-3000 Actuator is a lightweight and efficient device, designed to improve the overall performance of the ventilating apparatus. It helps create sufficient air circulation.

The compressor spring kit features a front barometric relief spring, back barometric relief springs, and a freeze tube preventer. The kit is ideal for V-3000 industrial duty reciprocating pumps with a high pressure differential of greater than four to eight psi.

The Johnson Controls Spring Kit V-3000 is a repair system designed with all the tools required for spring replacement. This kit is ideal for fixing springs in many applications from air conditioners, furnaces, and boilers. It comes with a complete set of tools, all necessary hardware, plus extra parts, so you'll never have to go looking for anything else.

For outdoor use-adds 4-8 PSI.

Set of three coil springs to install on Series 4000 size 2 12.5" Stem Actuators to restore maximum actuator lift pressure. For application on Conformally Coated PVDF PVDF with two hooks per wire.

Over time, springs can get weak and fail to maintain adequate pressure in the vapor compression cycle. Replace them with this kit from Johnson Controls for highest performance and drier, more comfortable air.

The Johnson Controls V-3000 Mechanical Power Vent, the industry's top performer for installed mechanical power vent installations, is a high-velocity exhaust fan sized to meet the needs of a wide range of residential and light commercial building applications. It is designed for continuous use in residential and light commercial "through-the-wall" applications that require a -30" to 100" fresh air ventilation path. Available in a variety of finishes, it is suitable for direct vent or non-direct vent installation.

Protects air compressor pistons, piston rod bushings, and cylinder blocks from damage caused by dry lubricants. Compatible with most makes or models of air compressors.

For over 30 years, the VG7000 Series of valve actuators have been a staple of industrial and commercial buildings. When it comes to energy automation, this is where we've made our name.

The VG7000 Series Refrigerant Actuators can be used in many low pressure residential and commercial refrigeration systems. They will provide the power needed to move food and beverage products through a system and reduce condenser coil icing conditions by regulating the airflow. The polyurethane diaphragm, high molding-resistance wire, and zinc internal components ensure years of reliable operation.