Johnson Controls 36476 VG7241GT+7152G "1/2"" PDTC 4.6cv 0-10vdc NSR"

"1/2"" PDTC 4.6cv 0-10vdc NSR"

The VG7241GT+7152G "1/2"" PDTC 4.6cv 0-10vdc NSR" is a Johnson Controls 36476 Security Controller, suitable for Commercial & Industrial Applications.

The Johnson Controls 36476 VG7241GT+7152G "1/2"" PDTC 4.6cv 0-10vdc NSR" transmitter is a model 36456; this indoor transmitter is an infrared, form "A", non-selective sensor for use with the VG7241 and VG7150 remote units. This transmitter has a voltage input range of 4.6 to 28 volts dc, and a current input range of 0 to 10 volts dc; the output signal is active low logic - the source is activated when voltage or current drops below the setpoint threshold. The transmission distance for this

This Johnson Controls 36476 VG7241GT+7152G "1/2" PDTC 4.6CV 0-10VDC NSR is a station transmitter module, for use with Johnson Controls Modicon M221 Micro-MC control panel, 1 to 10 volt dc signal outputs, 1/2 inch process distributors, Incremental encoder

The VG7241GT+7152G is a 1/2" plus-gold thermocouple that has a voltage rating of 4.6 VDC, a current rating of 0 to 10 mA DC, and a thermocouple type of K.

Sarvi PDTC Heat Sink (NSR = Non-lubricated Solid Rubber)

The VG7241_GT+7152G is a collection of 1/2" digital transmitters designed for use with Johnson Controls IntelliTouch® systems. One transmitter includes one integrated solid state relay (SSR). The SSR has an input supply current rating of 5mA to 250mA and a load supply current rating of 600mA maximum. Each transmitter incorporates a sensor output signal for sensing the status of the connected loads, either by voltage or by current.

Grab Bar- Johnson Controls 36476 VG7241GT+7152G

The VG7241GT+ provides two voltage inputs for up to eight analog process sensors. Inputs are field selectable 4.6V or 10V. The control can provide up to four adjustable output relay contacts or six solid state outputs (two at 250mA, two at 500mA, one at 1A). The control also has an analog voltmeter and two digital display readouts to show the temperature, set point temperature, alarm temperature, and output selection. The integrated sensor diagnostics ensures the correct sensor is connected and indicated by LED status.

Our Sensor VigiTrak Oil Pressure Gauge Kit features a cast aluminum 1/2"square tube pedestal mount pressure gauge, a complete mounting kit and choice of display color.

The Johnson Controls 36476 VG7241GT+7152G is a purpose-built, high performance, direct digital control (DDC) actuator with built-in power electronics. Designed with the complex driving task of an HVAC system in mind, this actuator is extremely reliable and is able to maximize your reduction of kW demand by backing off your compressors, fans, and pumps. It is fully sealed for use in most any application.

The VG7241 is a compact, three-instrument (voltmeter (V), gauge (G) and thermometer (T)) digital transformerless current regulator with a very fast 7.5 µs response time. It has been designed for general purpose applications in telecommunications and instrumentation systems where voltage regulation accuracy is not critical.

STANDARD FEATURES: