Johnson Controls 39344 VG7441LS+3801D "3/4"" N/C 7.3cv 4-8#w/3801 "

"3/4"" N/C 7.3cv 4-8#w/3801 "

The Johnson Controls 39344 VG7441LS+3801D "3/4"" N/C 7.3cv 4-8#w/3801 " direct-fired self-venting gas valve has a fire gas assembly constructed of brass and a spring assembly, as well as a stainless steel burner tube and bracing.

The VG7441LS+3801D is a Johnson Controls hot water immersion controller. The VG7441LS+3801D has a 3/4"" N/C 7.3cv 4-8#w/3801.

The VG7441LS+3801D from Johnson Controls, is a "3/4" inch -10 to +50F Vertical Nema 7.3 Bolt Hole, 7.3 cv, 8# Spring Open to Close Bellows Actuator With Bellows

The 39344 VG7441LS+3801D Gas Valve is designed to fit the 400A, 630A and 750A series N/C natural gas heat pumps. The gas valve is easy to install and replaces any 39324 and 39335 Pacific Controls Orifice Gas Valves.

The Johnson Controls 39344 VG7441LS+3801D pump is rated up to 7.3 cubic feet per minute (CFM) at 25 feet of head, with an inlet pressure of 8 phases. It eliminates contaminants in water pumped to your system, including iron, manganese, hydrogen sulfide, hydrogen carbonate, chloride, sodium and arsenic.

Electronic direct drive motor delivers superior performance of 7.3 HP, 2200 RPMs and 1725 in-lbs of torque. The 3801 controller with an on-board diagnostics system provides accurate on-line current flow, percent load on the motor by means of highly accurate incremental current flow feedback, % torque load on the motor, motor RPM and if there is a trip or stall condition.

The VG7441LS+3801D from Johnson Controls comes in a 177mm body length. This unit has a shell height of 179mm and a 1 circuit, direct drive sealed motor. It includes a No Clean Filtration System that works with oil recovery. The PSC motor produces 7.3 HP, while the open line voltage is 208-230/440-460 Volts, 60 Hertz, 3 Phase. It's used for all types of screw compression, vacuum pumps and booster systems.

OnGuard single channel, Non-Contact Voltage Detector for use with 3801 and BH3801A.

The VG7441LS+3801D Variable Frequency Drive controls AC motors and 3-phase AC induction motors. The drive provides electronic motor control, and AC power monitoring with local and remote alarm/diagnostics. It also includes Green Power Mode and system resets by front panel push buttons.

See the true performance of your outdoor power equipment. From the finest in ignition and electrical components to advanced axles and suspension systems, we have what it takes to get the job done—day after day, season after season. At Johnson Controls, we value the investment you've made in your equipment. That's why we offer Genuine replacement parts so you can enjoy peace of mind knowing that what you've installed is the best there is—equipment designed for your specific piece of equipment.

Johnson Controls, Inc., is a world leader in a broad range of HVAC products and systems for new construction and retrofit applications, as well as refrigeration and air quality equipment for the food industry.