WEIL 380-000-000 McLain "60/360f 0/75# 1/4"" T & P Gauge"

"60/360f 0/75# 1/4"" T&P Gauge"

Cut custom wood pieces with ease using the McLain 60/360f 0/75# 1/4"" T&P Gauge.

The WEIL-RICHARD MCLAIN No. 60/360F 0/75# 1/4" T&P Gauge is designed for threading and pipe making. This compact scale is simple, precise, and easy-to-read. The standard 6" dial with graduations in hundredths of an inch helps ensure quick and accurate measurement on horizontal surfaces.

The McLain 60/360F 0/75# 1/4" T&P Gauge is very accurate, and provides the most common measurements for metalworking.

The Weil McLain T&P Gauge is an easy-to-read tool that makes it simple to test your T-Gas, P-Gas, and H2O pressure and temperature, while adapting to most nozzles and valves. Gauge features a 360° dial with 0.05 in of pressure scale, along with Hi/Lo settings to indicate high and low limits. Tool includes a scratch-resistant body for maximum durability, while a flexible neck makes placement easy.

The Weil-McLain 380 000 001 gauge has a useful range of 60 psi to 360 psi enables precision readings especially in higher pressure ranges. The gauge's check valve and drain are easy to use. The large 2 inch diameter face is easy to read. This gauge conforms to: ASTM D141, Standard Test Method for Determining the Compressive Strength of Hydraulic Cement Mortars at 28 days; ASTM C-109, Standard Test Method for Determining Compressive Strength of Hydraulic Cement Mortars at 7 and 28 days; ASTM C-110, Standard Specification

The Petrolight T&P T-Gauge gives you a visual indication on a scale of Pressure and Flow. This allows you to be sure that your fuel pump is operating correctly.

An essential gauge for any toolbox, this is a high quality Engineer's scale that's used for measuring torque and angle. Features include Three Working Ranges 0 to 75 lbs Force x 0 to 60 degrees, Precision measuring tool for torque wrench & angle meter, Includes 2 columns and 6 rows of graduations, Recessed Cursor makes reading easier, Additional scales (Cents per Turn and Circular Inch) allows user to vary Reading when using different sized bolts