WEIL 450-021-242 CG4 DRAFT HOOD -MCLAIN -MCLAIN 35069

DH-V 6D NOMx5D NOMx20.93 Draft Hood

DH-V 6D NOM +5D NO with folding frame designed to vent the products of combustion from residential gas or oil heaters into the flue or chimney. - Maximum draft. Ductile iron housing with cast iron shelf. 7' length, with 3" NAD stick & lid, 5"NO outlet and 4" x 1/4" OPH flue connector.

The DHV-CG4-451 is designed for use with the MCLAIN 400-20 Series, stainless steel cafeteria tables. This draft hood is constructed of carbon steel with a 1/2" air damper and features a 12" x 23 1/2" rectangular duct connector.

Professional quality Draft Hood with butterfly damper. For use with a minimum of a 17" duct. Requires 2" collar pipe, clamp, screws, etc... See installation instructions for details.

Weil-McLain DH-V and DH-A models are a group of gas boilers that operate in the same manner and use the same controls as the rest of the Weil-McLain line. The DH and DHA have a slightly larger firebox than standard boilers, which prolongs furnace life and minimizes the chance for corrosion problems. These boilers are available with either an external or internal draft hood. All models include a patented induction outlet which stabilizes temperatures and results in less unburned fuel being leaked into the flue gases under low load conditions.

The CG4 is our most popular draft hood for commercial chef stoves, heatsinks and blowers. Designed to fit MCLAIN RANGE/HOTPLATE models CGF22, CGF23, CG22, CG23, CGN1600, CGH2140R & D; WEIL-MCLAIN 42" RANGE/HOTPLATE models MSF42, MSF43 & MSF44; and WEIL-MCLAIN 48" RANGE/HOTPLATE models MSR48 (requires 1-1/8" x 3" elbow). Measuring 9

Quality rebuilt draft hood, tested and cleaned.

This draft hood is used in both wet and dry process systems. It is certified to meet the requirements of NFPA Code 30-1999, NFPA Code 90A-95 edition and NFPA Code 98-2006.