WEIL 510-811-461 NAT GAS THERMOCOUPLE TO THERMOPILE CONVERSION KIT -MCLAIN -MCLAIN 863652

Kit Conv Thrml-THRMOPILE NG Thermocouple to Thermo

This THERMOPILE NG Thermocouple to Thermopile Converter Kit is used to convert a thermocouple into a thermopile.  The kit allows the user to display the thermopiles as "thermocouples" on the Metasys system. A thermopile is a thermal sensor that has multiple thermostatically controlled sensors in one package, typically made of three or five junctions. The individual sensors are electrically connected in parallel and act like buckets into which heat must flow before a temperature measurement can be determined. If any bucket is cold, the entire device will

The WEIL 510-811-461 NAT GAS THERMOCOUPLE TO THERMOPILE CONVERSION KIT -MCLAIN -MCLAIN 863652 is designed to convert a conventional natural gas-fired hot water heater thermocouple to a thermopile. This is accomplished by using the THERMOCOUPLES CUSTOM MADE FROM TI/AL ALLOY SHEATHED IN 17-7PH STAINLESS STEEL and the BRASS FILTER ELEMENT PREPACKAGED WITH THERMO PAD AND BINDER WIRE.

Searching for WEIL 510-811-461 NAT GAS THERMOCOUPLE TO THERMOPILE CONVERSION KIT -MCLAIN -MCLAIN 863652? You are in luck. We offer a fantastic selection of temperature measurement devices and products that are competitively priced. With our vast inventory of scientific equipment we are able to source just about anything from labs and other commercial organizations.

This item has been discontinued by the manufacturer and is here for archival purposes. The information presented here may be outdated as this is for reference only. Please go to https://www.weil-america.com/product/WEIL-510-811-461-NAT-GAS-THERMOCOUPLE-TO-THERMOPILE_24861 for current information.

The WEIL 510-811-461 Nat Gas Thermocouple to Thermopile Conversion Kit ­Mclain -Mclain 863652 is a kit that has been manufactured by Mclain for use with various heating systems. This kit consists of a thermocouple and an adapter. The thermocouple is used along with a thermo-Pile or a Flame Sensor to sense fire presence in boilers or furnaces. Being a thermocouple, it does not normally generate any significant heat but when it does get exposed to flames, it heats up resulting in the reduction of resistance causing an

The WEIL 510-811-461 Thermocouple to Thermopile Conversion kit allows you to convert a U-tube type thermocouple into a thermopile using the pre-engineered module. The thermocouple is connected to the terminal block on the module and the thermopile (2.5 inch diameter) is inserted and clamped around it.

This 8-1/2" long, 3/4" OD thermocouple to thermopile conversion kit (CG3450) consists of a .079" diameter polyurethane coated copper conductor with silica insulation and metal sheild, 20 ft. of silicone insulated single strand wire and one MCLAIN 9681002-PT38 thermopile. The WEIL 510-811-461 Short 1" Ball Screw Thermocouple Sensor Probe, 12' (3.65 meters) with it's extended stainless steel sheath and rear shielding is also included.