WEIL 511-624-512 McLain "0.80""WC PRESSURE SWITCH"

"0.80""WC PRESSURE SWITCH"

This 0.80""WC PRESSURE SWITCH is a stocked item and ready to be shipped to you today.

Pressure switch, 0.80"" WC, 22.0 A

Keep your kitchen clean, safe, and green with this pressure switch, which comes with a 0.5"" to 0.80"" WC capacity, 12"" H x 3"" W x 2"" D dimensions, and 601-series"

Weil McLain Pressure Switch"

Pressure switches are used to control air, steam, or water at or near their point of generation. The instruments detect liquids or gases through the action of float, diaphragm, bourdon tube, lever, needle types positioned by mechanical linkage with the operating mechanism. 4-20mA signal output is standard."

Switches automatically shut your hot water heater off when the temperature drops below the required temperature for peak efficiency. This switch is reliable and easy to use, with an illuminated ON/OFF indicator lamp. The WEIL 511-624-512 McLain pressure switch is suitable for copper tubing that is up to 1/2"" (13mm) in diameter.

The WEIL 511-624-512 pneumatic control pressure switch produces a reliable 24 VDC output signal with 0.00005 in H2O to 0.003 in H2O (0.76 mm H2O to 7.62 mm H2O) differential pressure at the SPST normally open (N/O) contacts.

Weil Mclain pressure switches are used to trip pressure switches when the water in their tank exceeds a certain level. These pressure switches are available in 2-wire and 3-wire models to accommodate various wiring configurations. Available models include 624, 626, 628, 636, 642, 645, 647, 648, 650, 724, 726, 736, 742, 745 and 748.

Pressure switches are used to turn on or off pump motors in response to changes in flow or fluid preasure

Pressure switches operate cooling and heating systems and provide a means of control for many other devices. They can be used to start and stop processes, control fluid flow through pipes, valves, and instruments, and monitor the level of liquids. These devices work on low or high pressure systems and use various methods of measuring pressure such as dial indicators, mechanical linkage, electronic pressure transducers, and transistors

Pressure switches are designed to monitor pressure of a liquid or gas within a pipeline. For example, pressurization of a pipeline for hydraulic purposes. These switches are used as safety devices on large tanks of liquid, to monitor level and prevent over filling. This particular item is a pressure switch typically used upon a pressurized cylinder containing highly flammable or corrosive chemicals.