WHITE-RODGERS 13961 24A07E-1 208V ELEC.HEAT RELAY w/oEnclos

208V Electric Heat Relay With Skeleton Constructio

Protect your home from overvoltage, undervoltage and short-circuit problems that can cause electrical fires. Keeps you safe and comfortable using a white-Rodgers system. Includes one 24A07E-1 electric heat relay without enclosure. Relay only, does not include thermostat or wiring.

WHITE-RODGERS 13961 24A07E-1 208V ELECT.HEAT RELAY w/oEnclosure 24 VAC, 50/60 Hz, 1 Form A Contact 3 Form B Contacts These heat relays are used in overhead electric baseboard heat. White-Rodgers 13961 24A07E-1 208V Elec.

The White-Rodgers 13961 24A07E-1 208V Electric Heat Relay is a brand new 208 volt heat relay with skeleton construction and a white plastic disc dial. This electric heat relay measures approximately 4 1/8" in diameter by 3" high and is rated for 240 volts. The terminal screws are closed type and the contacts are rated to .08 amps @ 120 volts AC. The temperature range for this heat relay is 40 degrees F to 200 degrees F, operating and 10 degrees F to 140 degrees F, non-operating.

WHITE-RODGERS 13961 24A07E-1 208V ELEC.

This WHITE-RODGERS 208V Electric Heat Relay is a combination electric and thermal overload relay that can be used to control heating unit operation. It has a 5/8" stud, common shaft and terminals, and 24V coil voltage.

WHITE-RODGERS 13961 24A07E-1 208V ELECTRIC HEAT RELAY WITH SKELETON CONSTRUCTION, BX TERMINALS

Relay is the generic term for a switch. A relay is an electrically operated switch. Relays are used where it is necessary to control a circuit by a separate low-power signal, such as from a sensor or timer, or to control high-power circuits requiring more power than can be supplied by an individual electronic switching device (such as a transistor).

Relay, Water Heater Relay, Control Relays, Electric Heat Relays, 208V Electric Heat Relay, White-Rodgers White Rodgers 13961 24A07E-1 208V Electric Heat Relay With Skeleton Construction

This is a White-Rodgers 13961 24A07E-1 208V Electric Heat Relay, which can be used with forced air or radiant heating systems. This item is used and has been tested, but is not guaranteed to be in working order. It could have minor damage or defects. You will need to install this into your system.