York 022-09779-000 Liquid Stop Valve

Liquid Stop Valve

York Commercial Heating part 022-09779-000 Liquid Stop Valve 5P 145 Amp With Aux Contactor

This liquid stop valve screws into the gas pipe and allows you to control the flow of liquid propane. This is a 110 volt coil with an electrical auxiliary, 5 Pipe Connection and 145 amps. Comes with gasket and nut for mounting.

The York 022-09779-000 Liquid Stop Valve is used for domestic water applications and features a coil, High quality copper construction, Maximum flow 6.4 gpd@60 psi, 145 amps, 110v coil

Flex the power of your coils by incorporating the York Liquid Stop Valve in your heating component system. This simple to install device allows you to safely shut off the flow of liquid to your coils when not in use.

York's Liquid Stop Valve allows for system flushing when installed in bleed line between tank and controller on gas-fired water heaters.

The Liquid Stop Valve is designed to override the liquid valve to stop water flow. The device is installed inline with the water line which allows for easier service and testing than by replacing the entire water supply.

The York 022-09779-000 Liquid Stop Valve is an excellent choice when looking for an environmentally friendly option from a brand you can trust. It features automatic reset that allows the valve to open after distribution stops to provide uninterrupted water flow, and has a flow setting adjustment as well as a built-in trouble indicator LED. This valve comes factory preset for 24V and 110V. You can adjust the flow setting by selecting a small, medium or large dial on the side of the device.

Liquid Stop Valve

York's Liquid Stop Valve provides an easy way for plumbers to shut off the water supply to many York tankless gas water heaters. The L.S.V. includes a four-inch brass tee and 5-foot coil cord to reach tanks up to 100 feet from the electrical supply.

Use Liquid stop to control the water flow reaching your ice maker and dispensing system. Room temperature liquid products like Xango Mangos, Apple Juice, Kombucha tea and other similar products are stored in large holding tanks or reservoirs ready for transfer to your ice making machine. Liquid stop valves are utilized to keep water from entering your dispenser until you need it, preventing waste. Because using a Liquid stop will help maintain purity of incoming water and extend the life of pressurized equipment:

The Liquid-Stop is designed to stop the flow of FROTHING LIQUIDS ONLY. Do not use the Liquid-Stop with abrasive or other particulate liquids.

Electronic relays control the position of valves so that when the pressure falls in one tank, the valve opens and excess liquid drains into another. One pump can drain both tanks; a second pump can then move the liquid to a third holding tank or directly to its final destination.