York 022-10682-001 Relief Valve

Relief Valve

The York 022-10682-001 Relief Valve is a white plastic relief valve. This relief valve measures 2" high and 1-5/16" wide with a wall thickness of 0.09".

The product is a relief valve, with a handle attached to a small plunger inside. If the user has the handle facing up, then the plunger will retract into the valve. When the handle is facing down towards the floor, then it will extend out of the valve. The cross section of the vertical portion of the product is rectangular, measuring 12 cm by 10 cm.

The York 022-10682-001 Relief Valve is a replacement exhaust pressure valve. It is one of the products manufactured by York that is quite helpful in making sure that your heater or air conditioner will work in good condition.

The York 022-10682-001 Relief Valve, made to endure years of use, provides home comfort for your indoor and outdoor needs. The York 5/8 in. relief valve is designed to connect a unit's condensate line to a drain line for easy removal of condensate water. This item comes with a brass body and a stainless steel diaphragm to ensure long-lasting uses.

The York 022-10682-001 relief valve is designed for YORK reverse cycle systems. The emergency valve opens in the event of high water pressure to protect the compressor.

The York 0195-10682-001 relief valve is designed to be installed on the water heater and reduce the pressure created by the internal pressure of the water heater.

When the temperature is low and you need to regulate it, you can turn to York's EZ-Drain Relief Valve. The Relief Valve is a perfect addition to your heating unit if it doesn't have one already. For added convenience, this valve is easy to install, so don't hesitate to purchase if needed!