York S1-024-20870-000 Product S1-02420870000

24V SPDT Relay

The S1-024-20870-000 is a 24V SPDT relay with a coil power rating of 5A @ 30VDC and 4A continuous.

The S1-024/2-00 is a SPDT relay with a standard voltage rating of 24VAC, an operating voltage range of 15 to 250VAC and a resistance of 50 ohms. The SPDT relay has two NO (normally on) contacts and one NC (normally off) contact...

The S1-02420870-000 SPDT Relay is mounted to an IP67 waterproof, pressure proof aluminium jacket. It is fully encapsulated with seal ring. The IP67 value means that the relay can be used in wet conditions and subjected to pressures of up to 6 bar without leakage.

The SPDT relay has a rated current of 10A. It connects to the 24V power source by screw terminal. There are two switches for load switching. The relays are great for many different applications, including controlling electric heaters, garage doors, etc...

The S1-024-20870-000 Product Relay, a unique SQUARE D® product, combines two SPDT (Single Pole, Double Throw) Relay contacts into one small package, which reduces the size of the equipment to be controlled. Built to control normally open or normally closed loads from 24Vdc supply voltage via a large amp rating, the S1-024-20870-000 Relay is used where a small controller is required due to space limitations.

The York S1-024-20870-000 is an SPDT (Single Pole Double Throw) relay. It can be used on many different electronic devices like for lights on racecars or on trucks, cruise control, windshield wipers, audio equipment, etc.. This part is 24Vdc @ 15A resistive load.

The CT Wiring Device S1-024 is a SPDT relay with a 2.5A maximum load current.